Desert-Hawk

ASI Instructors needed, ATV Safety Institute

6 posts in this topic

If you’d like to be an ASI Instructor…. read on:

We’re looking for a few good ATV Instructors and Training Sites in the following areas:

San Diego, California

Riverside, California

Orange County, California

Phoenix, Arizona

Cheyenne, Wyoming

Castle Rock, Colorado

Las Vegas, Nevada,

Lufkin, Texas

Okeechobee, Florida

Pompton Plains, New Jersey

If you live in one of the above areas and are interested in becoming an ASI Certified ATV Instructor, or if you know of available land we can use as a training site*, please give us a call at (800) 786-5559.

* Land must be an open, level space approximately 150’ x 200’ of dirt, grass, sand, or snow, free of obstacles and away from other riders.

ATV Safety Institute

Share this post


Link to post
Share on other sites
  •  Like what you are reading? Please help us by sharing this content.


Are you an instructor with them? Just curious. Is there anything in New York?

Share this post


Link to post
Share on other sites
  •  Like what you are reading? Please help us by sharing this content.

No I get updates and pass the info along

Go to the web site and send them a note

ya just never know:wink:

Share this post


Link to post
Share on other sites
  •  Like what you are reading? Please help us by sharing this content.

Thats interesting. I dont see where in Vegas they would have the land to train because the only legal riding place is Apex and thats always packed full of people.

Share this post


Link to post
Share on other sites
  •  Like what you are reading? Please help us by sharing this content.

It looks like they are looking for someone with land to become an instructor, private property...

Share this post


Link to post
Share on other sites
  •  Like what you are reading? Please help us by sharing this content.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  •  Like what you are reading? Please help us by sharing this content.
  • Similar Content

    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
    • By pickytar
      I have a Chinese Hybird 250 or that's what I was told it was. I found 17 numbers on the frame. Will these numbers tell me exactly what it is that I have? (I know that its a 2006 from a plate on the front)
    • By txlora84
      I have a 110cc atv not sure of a brand its a Chinese model. I put on a new harness with cdi solenoid and all those. I have put a new starter on, and carburetor. I bypassed the start button cause it was just making the solenoid click. with the new button switch the atv will crank but not start. I tried to jump the solenoid and it did nothing. I am stumped. also I noticed gas leaking from the carburetor and when I took the filter off there was gas in it. I cleaned the carburetor and nothing was stuck or clogged. can someone help me out.
    • By Pitbulls3489
      I have a 2009 big bear that needs a top end , i have found a couple 2001 models on ebay my question is are they compatible? Is a 2009 400 cc big bear cylinder head the same one on a 2001 big bear 400 cc??
      Please help..