Quantcast
Jump to content

Recommended Posts

Posted

ok, first time on here so be patient please and im sorry if i forget anything or have to much. ok so i have a 2007 suzuki ltz 400. first thing was that it all of a sudden just starting acting weird. it has all of its power when running fine but it has moments to where it acts like it is starving for gas. it will run then it just wants to die. then i can wait 20 mins and ride it and it will b fine for a little bit for like 20 mins of riding. and that started happening first. then i got a yoshi slip on and put it on and then took it to the sh op and got the carb cleaned and jetted for the slip on. changed the oil and etc... then after it got rejetted it ran fine for a day meaning about 1/4 of a tank of gas. then same thing starts happening. so i figured something got stuck in the carb somewhere in one of the jets, i cleaned the carb completely and cleaned out the petcock and tank. still doing the same thing. just taking spells from one start up to another. after that the only thing i did was was checked to see if it was geting gas to the carb and it is. so i dnt know if it could be in the electrical like the cdi or what, Please help im desperate to get it fixed before warm weather. if you need other information just ask. Thanks

Posted

ok, first time on here so be patient please and im sorry if i forget anything or have to much. ok so i have a 2007 suzuki ltz 400. first thing was that it all of a sudden just starting acting weird. it has all of its power when running fine but it has moments to where it acts like it is starving for gas. it will run then it just wants to die. then i can wait 20 mins and ride it and it will b fine for a little bit for like 20 mins of riding. and that started happening first. then i got a yoshi slip on and put it on and then took it to the sh op and got the carb cleaned and jetted for the slip on. changed the oil and etc... then after it got rejetted it ran fine for a day meaning about 1/4 of a tank of gas. then same thing starts happening. so i figured something got stuck in the carb somewhere in one of the jets, i cleaned the carb completely and cleaned out the petcock and tank. still doing the same thing. just taking spells from one start up to another. after that the only thing i did was was checked to see if it was geting gas to the carb and it is. so i dnt know if it could be in the electrical like the cdi or what, Please help im desperate to get it fixed before warm weather. if you need other information just ask. Thanks

Posted

most times if it runs good for 20 minutes, then starts going crazy not wanting to run right, is because of a bad coil. a cold coil will run good until it heats up, then goes for a crap. not saying that is what is wrong with yours, but something to look at. look at your spark with the plug out and grounded to the motor and crank it over. probably really bright blue. run the bike until it starts acting up again and pull the plug and do the same thing. could be dimmer. im not sure there is a test that would 100 per cent tell you its the coil ... maybe someone else will jump in and give you a few ideas ...

Posted

ya I forgot to mention it has brand new coil and plug and I could understand that if it was a constant like that but even sometimes if I haven't started for a day or so the problem sometimes starts right on the first start within like a minute also sometimes when it is acting up it sputters really really bad

Posted

I'm not familiar with your machine, but could be a fuel issue.

1. Check that your fuel tank vent is not clogged.

2. Check if the choke is stuck.

3. Disconnect the vacuum suck line from the carb to the fuel tank valve and select to reserve. This is to check if the carb is sucking in fuel from the valve simulating a choked condition.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
×
×
  • Create New...