Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Richard Paradise
My 1997 Beg Bear got stuck in 2nd Gear when parked on slight hill, otherwise in perfect shape. Trying to get it into neutral, by rocking it back and forth won't release out of gear.
Any suggestions, It's my work horse and I keep it in to shape, got to get it running..
By Gary Ferguson
My old Big Bear nearly left me stranded but I managed to limp back to my garage just before it died. Now No Spark. I’ve changed the obvious, inexpensive and easy parts- spark plug & coil without any luck.
Ive stripped it down and traced all of the related wiring, checking as many connections as I can but no luck again.
Next I pulled the cover and accessed the stator housing to inspect and do some resistance testing to ID a possible short.
Here are my readings:
Source coil- 325 ohms
Pickup coil- 225
Can anyone tell me if these are good numbers, and if good, where to go next?
I assume my next purchase will either be a new stator or CDI, but since neither of these tend to be returnable items I want to be as sure as I can I’m gonna get a resolution to the problem!!
Gary in SC
By Scott Matthews
Just picked up a 1989 Big Bear 350 for $250 CAD. Bike was running but lost crank and spark. They've installed a new coil, a couple relays, and installed a Ford starter solenoid in place of the original. Now it cranks but has no spark so they sold it to me. Does anyone have a wiring diagram for this bike so I can test some wiring. Also any ideas as to direction to head would be nice. Lots of things have been hacked together so I know it probably wont be to easy. The ignition switch was replaced with a toggle switch, I already mentioned the Ford solenoid which 1 of the small wires was not re-installed, and a diode or something was removed from the oil temp sensor wire. I'm sure I will find more so a diagram would be amazing.
By Vybrano Cz
(I don't have manual and there isn't one on the internet)
It's a 150cc ATV, automatic transmission, automatic starter, with zero electric devices.
I have to mount at least some front/rear lights. But for how many watts should I aim in total on entire ATV? You know, for example there are 10/50/200 Watt lights. But it's impossible to order some, when I don't know if I should keep entire ATV under 100 Watts? Under 500 Watts? Under 1000 Watts?
By Sharon van den Berg
We bought an old atv from friends to bum around on the farm with. VIN number is rusted off. Is there a way to determine the year model from the engine number? We only need the info to buy parts. Please help
Similar Tagged Content
By Martin Carrière
Recently bought my BB. Everything works great. Only thing is, each time I put it in reverse, it either starts to rev high and start moving without giving it gas or I'll give it a bit of gas and let go and it will still rev at the same rpm or higher and keep moving. Doesn't do it for high or low.
By Guest Fox300exchic
The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
Hi all, I try to find this manual in the threads but you have a lot of stock here
Cannot find this particular manual.
I found it for YFM200 but not sure if they are the same.
Thanks if you could help me with that.
Im new here so if I did something wrong, please tell me.
Recently Browsing 0 members
No registered users viewing this page.