Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I have a gentleman that asked me to service his bayou for him. I have always wondered what oil should be used in atv engines? Pros? Cons? What weight should be used in what type of weather? Is there one kind that I could bulk buy and safely used in any quad I worked on or owned? What about performance? Engine Life? This has always been a 🤔🤔🤔 area for me with quads as far as why you would use one type of oil over another....
I bought a 2018 Rubicon with IRS, DCT, power steering, low range and deluxe package. I thought I would pass on my observations for others thinking of buying.
I could have bought a new one for not much more money, but since they quit putting low range in Rubicons I bought a used one. I wanted a foot shift, but couldn't find one with low range so I bought this one.
Power steering: This is the first EPS quad I ever rode. I'm an old school keep it simple kind of guy, but I love EPS. When I first rode this thing, I was amazed at the tight turning radius, Then it dawned on me that it only seems tighter because with EPS I make better use of the steering. Yes yes yes.
DCT automatic shift. I like it, but I would still rather have foot shift. Not only because of simplicity and reliability, but because with foot shift manual transmissions I know the exact moment it will engage, no surprise lunge. If you ask me, DCT is a waste of money. I think they sell 8 times as many DCT as foot shift because they make 8 times as many, not because of demand. I like to ride one handed, I find I don't get tired as fast. Otherwise I would keep it in ES mode. I like to do my own shifting.
Engine. I love the water cooled engine, so much quieter and I expect it to last much longer than an air cooled one. The fuel injection is wonderful and the gas mileage was a pleasant surprise. I don't buy into the "longitudinally mounted" sales talk. Horsepower is not lost by gears and shafts changing direction, it is lost by friction and slippage. This engine is mounted way too high, forcing them to make the seat much higher than it should be. I don't like the resulting high center of gravity. A cylinder at a 45 degree angle under the gas tank instead of the seat is a better design. Power and smoothness is more than adequate.
Suspension. I have the shocks all adjusted to the softest setting and wish the springs were a little weaker. Otherwise I like the IRS.
Ride quality/rider fatigue: This is the main reason I bought a Rubicon. I'm old. I love my Kingquad 300's but I hurt all over after 50 miles. I had High expectations of the Rubicon. The foam in the seat seems to be of very high quality and absorbs bumps well. There is one major flaw in the design of the Rubicon that impacts the ride quality....they mounted the handlebars much too far away from the seat. About 5 inches too far. I find myself riding with my bottom on the front third of the seat and even then wishing I didn't have to reach so far for the grips. Now I'm 5'11" so about average size rider. A short guy would be riding this thing all hunkered over like a kid on a crotch rocket bike with his neck kinked and peeking thru his eyebrows to see where he's going. That kind of riding has it's place, but not on a utility quad designed and marketed for ride quality. Vertical spine is comfort.
I thought about finding different handlebars, but the cables might not fit, or bind when I turn. If I was about 6',6", I probably wouldn't notice.
If I find a small frame Rancher with EPS and IRS, I will buy it. If it is as good a ride quality as the Rubicon, I'll sell the Rubicon, otherwise I will keep both.
By colin james
View File 2017-2019 sportsman 450/570 with eps factory service manual
This is the factory service manual for the 2017-2019 factory service manual for the sportsman 450/570 with electronic power steering
Submitter colin james Submitted 09/06/2018 Category Polaris ATV
Similar Tagged Content
I live in Minnesota and bought a 2016 CFORCE 500 HO. I am in hope to see if there is anyone in the US that is experiencing this sudden drop off in RPM below 4000 RPM. I have uploaded some videos of my issue on YouTube. I will list three of the four I posted. The fourth can be found on my channel but it is a comparison between my Polaris 570 and my CFORCE 500.
I quit on my first dealer because we just did not mix well together. I brought it to another CFMOTO dealer that just became a CFMOTO dealer in January 2016. They are in a large ranch and agriculture area in a neighboring state that is pretty close to where I live. They have close to every brand available. They are a much larger dealer than the first one I bought the unit from.
I brought the unit three weeks ago to them and they have worked on it a good solid week and have given up on it. I have read reports from owners in Canada that the dealers there were aware of the issue and have had success in fixing the herky jerky drivability issue.
I am picking it up tomorrow and bringing it back home. It has been to the trails of the Black Hills this year and was new in late April. 300 miles on it. It has never changed. Very hard to ride on the trails or when I herd livestock.
Here are the links to my videos.
I can't accept that this is normal operation. Does anyone from CFMOTO China scan these posts?
I need help that CFMOTO USA has not provided.
My 2005 Kawasaki Prarie 700 is not functioning as it should, has no speed, no power and backfires when slowing down, I've cleaned the carb...completely, cleaned the fuel filter, it has new spark plugs, it won't idle also and has recently become hard to start, I adjusted the idle but still no results, any help or suggestions would be greatly appreciated
Polaris Ranger Utility Vehicle Owners Earn $200 (Atlanta)
DO YOU OWN A POLARIS RANGER 500 OR 570? EARN $200
We are a market research company that pays people for their time and opinions. We are not selling anything; we are only interested in your opinion which will help the manufacturers develop better products in the future.
We are going to be conducting a Utility Vehicle focus group research study in Atlanta on Wednesday and Thursday June 11th. & 12th. at 6:00 PM. You will have an opportunity to share your opinion regarding current and future utility vehicle designs and will be paid $200.00 for your time.
If you don't own one of these utility vehicles, please tell your friends about this study.
WE ARE LOOKING FOR MODEL YEARS 2010 OR NEWER.
REGISTRATION OR BILL OF SALE IS REQUIRED AS PROOF OF OWNERSHIP.
Please call A Point of View Research ASAP to see if you qualify and register for one of the days.
So I was reading and a stock 2003 wolverine 350 should top out at 55 MPH and mine only does 44? What could be dragging it down? Any ideas appreciated. Btw I'm new here so hello everyone! I hope this forum is better than the others that I joined.
Recently Browsing 0 members
No registered users viewing this page.