Search the Community
Showing results for tags ' speed'.
-
My 20005 Prarie 700 won't go over 27-31 mph and actually loses power when you give it all the throttle it has, anyone have any ideas or ever had this problem before?
-
Hi All, I live in Minnesota and bought a 2016 CFORCE 500 HO. I am in hope to see if there is anyone in the US that is experiencing this sudden drop off in RPM below 4000 RPM. I have uploaded some videos of my issue on YouTube. I will list three of the four I posted. The fourth can be found on my channel but it is a comparison between my Polaris 570 and my CFORCE 500. I quit on my first dealer because we just did not mix well together. I brought it to another CFMOTO dealer that just became a CFMOTO dealer in January 2016. They are in a large ranch and agriculture area in a neighboring state that is pretty close to where I live. They have close to every brand available. They are a much larger dealer than the first one I bought the unit from. I brought the unit three weeks ago to them and they have worked on it a good solid week and have given up on it. I have read reports from owners in Canada that the dealers there were aware of the issue and have had success in fixing the herky jerky drivability issue. I am picking it up tomorrow and bringing it back home. It has been to the trails of the Black Hills this year and was new in late April. 300 miles on it. It has never changed. Very hard to ride on the trails or when I herd livestock. Here are the links to my videos. I can't accept that this is normal operation. Does anyone from CFMOTO China scan these posts? I need help that CFMOTO USA has not provided. Thanks Kevin
-
If youve looked at some of the factory mud machines youve noticed many have upgraded footpegs to help keep your feet firmly grounded. Rox Speed FX released universal foot pegs earlier this year for anyone. See what you think of them: REVIEW: Rox Speed FX ATV Foot Pegs - WeekendATV.com
-
My 2005 Kawasaki Prarie 700 is not functioning as it should, has no speed, no power and backfires when slowing down, I've cleaned the carb...completely, cleaned the fuel filter, it has new spark plugs, it won't idle also and has recently become hard to start, I adjusted the idle but still no results, any help or suggestions would be greatly appreciated
-
So I was reading and a stock 2003 wolverine 350 should top out at 55 MPH and mine only does 44? What could be dragging it down? Any ideas appreciated. Btw I'm new here so hello everyone! I hope this forum is better than the others that I joined.
-
These are stock quads nothing added for more horse power speeds they should go right out of the gate. But remember these are claims of tops speed mostly on dirty roads and this is without cutting the limiter (DONT EVEN CUT THE LIMITER EVER YOU CAN BLOW YOUR MOTOR OR OVER HEAT THE ENGINE IN ABOUT 1 MINUTE OF TOP SPEED) And also keep in mind this could vary on temperature, climate, quad temperature ,quality of road dirt/paved, Pressure in tires and angle of rider.) 01-05,Polaris scrambler (2x4) MPH-65-70 MPH 01-05, Polaris scrambler (4x4) MPH-59-67 MPH Yamaha Raptor 660 MPH-78-85 MPH Can am Renegade 800 MPH-75-82 MPH Can am outlander 800 MPH-70-78 MPH Can am Ds650 MPH-78-85 MPH Polaris scrambler 850 MPH-79-80 MPH (Post your top speed on your bike post year cc's 2x4 or 4x4 and what after market parts added to motor anything not stock add to
-
Hi everyone I have a 2001 raptor 660 and I had it up to 75 mph and everyone says there is this speed limiter that won't let it go over 75 mph. I was wondering what you could do to make it go over 75 without different gearing or sprockets. Could you remove this limiter somehow. Thank You everything is stock besides the K and N airfilter
-
Hi everyone I have yamaha 2001 raptor 660 and I had it up to 75 mph and everyone says there is this speed limiter that won't let it go over 75 mph. I was wondering what you could do to make it go over 75 without different gearing or sprockets. Could you remove this limiter somehow. Thank You everything is stock besides the K and N
-
Can't find my speed sensor for 04 Kodiak 450.Someone sent me a drawing of its area,but not sure what I'm looking for.My Haynes manual doesn't even mention the speed sensor.How hard is it to get too??My speedo is reading "0" and need to check it out.
-
This video was submitted to the QUADCRAZY Video section by admin. Description of Video: Funny ATV crash at high speed. Video Tags: atv crash http://www.quadcrazy.com/video/video/&v=121391712255
-
i need help on removing the speed reduction spacer from my lt-z50 quad thanks don
-
We are trying to remove the "Maximum Speed reduction spacer" in my son's LT-Z50 quad. Can someone direct us to where this is at on the quad? If any one has a service manual on this and can shoot me a picture or post it online so I can see it would be very helpful. thanks Don
-
got an email from a friend about a speedwerx exhaust for my 03 AC 400 does anyone know how loud these things are?
-
Just thought I would start a poll on this topic manly because I'm not a fan of belt drives. Just want to know which you prefer.
-
We've just completed tweaking the forum area for a slight improvement in page load and speed. Firefox users should definately see a difference. Please let us know if there are any issues...ie. posting, etc... Any feedback if you notice any difference, and what browser you are using, is appreciated. We are testing this. Any issues can also be sent to [email protected] Thanks.