Latest Forum Topics

That's the BEST Job!!

great morning QC !! Only 1 job this week ! Figuring out what to do !

I just got a KXF50 for my little girl, she's pretty excited

I pulled the stator and realized it only has a pick up coil and not an energizing coil... The battery is completely dead and I had a jump pack hitched only to the cables. I was only getting 10.8V and it seems this CDI is very picky for voltage from what I have read. I have the battery charging and if it doesn't charge then I will pick up a new one. I have a Fluke 87 V, and I will have to look at voltage once the battery is charged. At least it gets an oil change at this point... Thanks,

Canada 1-0 yes !!

I'm watching South Africa give Canada all they can handle good game

There are several checks i go through on a no spark situation. You have already done the first on my list, correct OHM range on the pickup coil. Te next is check to make sure you are getting voltage to CDI also make sure it has a good ground, check all connections going to CDI from pickup coil. Make sure you are getting 12V to the main coil and it has a good ground. Even though you r OHMs were correct on pickup coil check to make sure its putting out voltage i do that with an analogue meter digital is not sensative enough to catch the miilisecond voltage spike from the coil, unless you have a peak voltage adapter or your meter could possibly have one built in if its expensive enough mine does not so i use the analogue meter. Generally if it passes all these tests then i replace the CDI.

Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. Any help would be great, Thanks!

Welcome to QC from Colorado !!

@mehim no nude/barely clothed photos please. I removed them from your last post.

Yes i have run into this before, aftermarket replacements usually involve both gears being replaced and they are not the same size as the OEM ones, but they mate together perfectly and do the job,i ran into this on an old machine recently if that has happened to you i would try to find the OEM gears, both, and replace them. Thats what i did took me a while and one ended up coming from Japan. The measurment would probably be different from an OEM one , if you just need to replace the race you could get the old one out measure it and should be able to find one at a bearing specialty shop.

Someone wanted to know if our campground was open to the public for weekend camping? All of our 50 campsites are set up to be seasonal campsites and they are all full. However, we do have a couple of primitive campsites with only power connections that people do rent for short term camping, but technically we don't have short term campsites. They also asked if we ran the campground while naked or are we clothed? Nudists use common sense when it comes to when we are naked. If we have work to do that requires the safety of clothing, we wear clothes. However, we love being naked and for 90% of the time we are dressed like you see us here. Most of our vendors are fine with meeting with us whether we are clothed or not. Hope that answers your questions

New member here. Hope will enjoy my staying here.

Hi all, I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear).

Great ride fri am about 2 1/2 hrs ! Lunch with wife 😋 garage time test of day twisted tea day 😋

Good game !!

Good match, Turkey pushed real hard.

3-2 darn !!

2-2 👌

2-1 ok we're ok 👌

This team is far better than I thought they would be !! 1-1 this will be a shoot out !! lol Ill need more Twisted Tea's lol !!

1-0 in 3 min… nice!

Me too with my Twisted Tea's LOL

I’m getting ready to watch now! Let’s go USA!

Go USA !!