-
Posts
3,925 -
Joined
-
Last visited
-
Days Won
208
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by Frank Angerano
-
-
Thanks for the link. I am going to have a look now. So the stator coil and pick up coil are combined not two different parts?
One produces voltage for the bike and the other for the spark pulse ?
-
I could use some help. I have a 2000 Yamaha bear tracker. The bike has no spark. I went through the entire harness, even removed it and toned out all wires for shorts etc. changed the coil, cdi, relays by the battery etc. I have had my eye on the stator coil but tested it for voltage and got voltage from it. The bike was jump started by a car and also welded on. I heard that was not good. My question I guess is will a bad stator still produce voltage but no spark ?
thaks.
-
Hey new to this group. I have a bear tracker 250 year is a 2000. No spark, went through the entire harness, changed coil and cdi!! Still no spark. I'm assuming after reading all this that it's the stator. Specifically after reading if the machine was welded on. Mine was! However will a bad stator still produce voltage ?? Mine does. Any help would be appreciated.
No spark 2000 Yamaha bear tracker
in Yamaha ATV Forum
Posted
Just looked at the Manual huge help with the resistance numbers. Going to check all the numbers today. Thanks for the link again. The rectifier/regulator could that interfere with my spark problem ?