Quantcast
Jump to content

Tiha

Members
  • Posts

    17
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Tiha

  1. Need to follow the voltage. You said you checked resistance but didn't mention voltage. Have to get a wiring diagram and follow voltage from the battery all the way to the CDI then back to the coil. As well as the pickup coil voltage.
  2. I know some guys that run SxS and larger off road trucks, but the ATV areas I have no idea. I am in iowa, not sure if it is worth the trip for me or not.
  3. Maybe do a compression check and make sure all is good. Does it spit or backfire at all? Maybe try starting fluid see if it will at least backfire. I had picked up a Kawasaki a few years ago and trying to get it running I was convinced the spark was not near strong enough. It was, that wasn't my problem. So don't blame a weak spark yet. Visually observing the spark can be misleading.
  4. I think I looked up that exact same thing and found the crankshaft ends were different, so in theory they will not interchange. I think I was going to put my 2001 400 into a blown 2004 450. But I did not look up the clutch parts individually.
  5. Kawasaki adjusts the same way. Be interesting to see how it goes for you. First time I did it after I bought the machine (used) it shifted really stiff. As much as I have tried over the years it has never been as easy shifting as it was before I first adjusted it. And I have adjusted it frequently over the last 20 years I have owned it.
  6. Very cool, Always wanted one. There is a mower deck that is supposed to go with it. That is what the PTO is for. Would have been perfect for the property I had at the time. Hope you get it going. Looking back I always kind of figured the mower deck would be underpowered but who knows. Mowing around ponds, side hills that was a great solution.
  7. You said jumping the solenoid it will try to turn over but doesn't. Can you put jumper cables right on the starter and see if it turns over? If it does then you have a battery, wiring, or cable issue. If not, then you have a starter or internal damage issue.
  8. My first ATV was a Bayou 300 with a manual trans. It has been a work horse for over 20 years now. Pushing snow, pulling trailers and joy riding. Great machine. Couple years back I bought a suzuki twin peaks, which is the same as a Kawisaki Prairie. It is auto (cvt) trans. It also has the down hill braking. Gotta say, sure is nice riding and not shifting all the time. But I only joy ride with it. Since I have added a couple Kodiak 400s. Both machines are auto CVT. Very simple, light machines. Too light in some cases. But great for joy riding. Growing up with CVT on snowmobiles I am probably hyper sensitive. They have come a long way and seem to be holding up well, but when we are out riding I am constantly riding and thinking, What was that smell? Was that burnt belt? I put the high dollar belts on when I buy the machine and have not had to replace one since yet. If me and the kids go riding we are always waiting on the person with the Manual trans (usually me) not for lack of power or top speed, Just the added time it takes shifting up and down instead of just mashing the throttle. We don't normally do mud or deep water. So the belt always stays dry. And don't buy cheap belts. Over and Over I read of people burning up cheap belts in 100 miles or less. Last time we were riding there was some SxS guys at the park. We followed them through the obstacle course. First guy tries an obstacle and you could hear the engine screaming and SxS not moving. Started seeing smoke. He fried his belt, that was it, he was done for the day. Made it 100 yards from the trailer. LOL short day.
  9. And that may very well be the case, On more than one occasion I have came across a guy with a new CDI that says it works on the 2000-2002 models but does not. They all have created a no crank situation. In each case the purchased CDI said it covered multiple models instead of being model specific. Thought it might be applicable in this case as well. It seems like those years are the hardest to find the correct ones. I keep thinking with some time and ingenuity a different model CDI could be adapted, but luckily I have always been able to scrounge the correct one up somewhere, so far.
  10. So just thinking outside the box. Does the CDI look new? I have read over and over about generic CDI boxes off ebay and amazon that will not allow the starter to crank.
  11. HaHa, I too feel your pain. Did the same thing on a 2001 kodiak. Guys said it had no spark. Tweekers tore it apart and I got most of it in boxes. Turns out it has spark but the rear end was locked up. LOL Anyway, I already had decided I was going to fix it no matter what so I started putting it together figuring I would troubleshoot when I get to a problem. If you can get the wiring diagram (I cannot access them yet) there might be a way to hot wire it. Or at least take resistance readings and see if anything is out of spec. Or just keep putting it together.
  12. Did you swap the Jets from your OE carb to the replacement? Chinese carbs are a crap shoot. I have had them with passages completely blocked and not milled into the housing. If you can go back to the OE carb. When it is bogging down in 3rd, what happens if you slowly start applying the choke? Does it improve any or immediately get worse?
  13. I use the timing light in the shop, but do you have the same problem i do? when I get he engine reved up it is flashing so fast the timing light is constantly on. But stare at it long enough you will see a blip if there is one. The little inline tester is great when you have to ride it for 30 minutes before it acts up. I duct tape it to the fender where you can kind of see it with a quick glance.
  14. Will it bog down in second gear running wide open long enough? Or on the same hill? I kind of went through this on a kawasaki. Swore it was the carb. Found the fuel petcock was restricting fuel flow. Pull the hose off the carb, open the petcock and make sure it runs out of there like crazy. Another machine that I swore was fuel delivery/carb issue turned out to be a bad CDI. Drove it around with the spark tester seen in the link below to verify I was losing spark instead of fuel. https://www.harborfreight.com/in-line-spark-checker-63590.html?utm_source=bing&utm_medium=cpc&utm_campaign=425671834&campaignid=425671834&utm_content=1154488236060144&adsetid=1154488236060144&product=63590&store=803&msclkid=ca606ebb889b12247b780d1b1997868d
  15. Do you have a voltmeter? Like Just Randy said that is the next option. If you have a bad regulator it will be charging over 14 volts and that causes problems. I can't remember the exact number but like 14.4 volts. Mine was the other way, I was only achieving 13.6 volts and was having trouble. New rectifier fixed it for me. Now it is charging properly.
  16. Popping through the carb is usually a lean condition. Could be a vacuum leak, when you put the air filter on it is sucking too much air from someplace else and not getting enough fuel. Make sure you float is set high enough. A float set too low can allow air to be sucked into through the bowl creating a lean condition. Chinses carbs are always a crap shoot. But sounds like you are close enough to make this one work. I had one that pilot jet port was not milled out. You just never know.
  17. Every chinese carb I have put on had the wrong jets in it. Too Small. Always had to either takes the jets out of the old carb or drill them out to the proper size. Beyond that I usually have to shim the needle because the mid range was lacking. Hope you got it.
×
×
  • Create New...