Quantcast
Jump to content


2005 Brute Force Running Hot?????


NYSGSP

Recommended Posts

My 2005 650 Brute Force Is Running Hot The Fan Is On 75 Percent Of The Time

Is That Normal?

My Hot Light Was Flashing The Other Day

When It Is Flashing Does That Mean "shut Down Now"

Or Does It Come On Solid When Its Time To Shut Down The Motor?

Thanks For Your Help

John

Link to comment
Share on other sites

My 2005 650 Brute Force Is Running Hot The Fan Is On 75 Percent Of The Time

Is That Normal?

My Hot Light Was Flashing The Other Day

When It Is Flashing Does That Mean "shut Down Now"

Or Does It Come On Solid When Its Time To Shut Down The Motor?

Thanks For Your Help

John

It is the hot time of the year, but that thing shoudl be able to stay at operating temparature and not have teh fan come on 75% of the time.

That's a Four-stroke, V-twin, liquid-cooled, SOHC, four-valve? I woudl check the coolant condition and level. also the oil level. Oil and coolant are what keep that thing running cool. Maybe it's time for a coolant flush?

Link to comment
Share on other sites

Also,,,You may want to Take the Radiator off and spray water through the fins until the water is clear on the other side.....Plugged Fins will make it run hot too......After that,,,,Make sure that the Fins are Straight.....Reinstall it,,,,add Coolant and Fire it up....Keep the Cap Popped and make sure you have circulation in the Radiator....If you dont.....You may have a Bad Impeller on your Pump...

Disclaimer......Im going off my Knowledge of my 23 yr old 2 Stroke....Technology might have changed....:laugh:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BenJammin
      I did a compression test on my 2005 Bombardier Traxter 650 CVT and it's 75 PSI.  service manual only talks about leak down test.  No specification for engine compression the manual.  What does 75 PSI tell me?  Thank in advance.
       
      A little history of this machine.  640 miles.  Picked it up about 2 years ago, not running. Probably the computer.  Tested all circuits and confirm it was the computer.  Long story short, I watched a Youtube video and fixed the computer. ATV now started and runs.  BUT, it tops out 20 MPH.  I cleaned the carb 3 times also using a Mikuni carb kit after the second time.  Slide in carb is going up and down.  Only adjustment for fuel is at 1.5 turns out.  NGK Sparkplug had soot on main part but brown on the electrode.  Champion sparkplug is brown.  I check CVT clutches and they both appear to engage like they suppose to.  Checked valve clearance it's 0.00, I can't get any feeler gauges in-between.  I check timing chain I believe it's in the correct position and hasn't skipped.  I removed muffler plug and drilled into muffler to try and make sure it wasn't plugged.
    • By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?
    • By Louznmemind
      Howdy y'all, I'm trying to fix a neighbors 2015 Brute Force 300. Came in with hard to start and won't idle except on choke issue. I pulled the carb and found the pilot jet as well as the emulsion tube partially clogged. Cleaned up everything, put it back together, still having issues...  It will start right up on choke and will also start off choke if you give it just a touch of throttle but it absolutely will not idle unless it's choked just a touch. Also, excuse my ignorance but I'm assuming the "dial" thingy attached to the carb that turns in and out is for setting idle?? 
    • By Tuzz
      Bucking started about a month ago and works ok after 1/2 hour warmup.  Today while working on it i discovered that if i put the ignition switch in LIGHT position it runs fine right from the start.
      I'm stumped!  Any idea why this could be?  

    • By kantrud97
      Hello i have a 2005 Bombardier Outlander max xt 400, i recently split the case to fix a oil leak. while in there i took out the oil pump and i cant find the torque specs for the oil pump to go back in, i tend to over tighten everything so im trying to go be the torque specs so i dont break anything.
       
      Thank you in advance
×
×
  • Create New...