Quantcast
Jump to content

2003 Suzuki ltz400 Cracked case


JasonB

Recommended Posts

It is a common problem on any machine that has thrown the chain. Check the shifter shaft for marks on the top that look like the chain has gouged into it, also check to see if the shaft is bent. I would recommend getting that crack welded up, if the part comes off completely, you will lose all your oil and I'm sure I don't need to tell you why that would be bad. Also, a good case saver will prevent things like that, and are a must on any chain driven machine IMO.

Link to comment
Share on other sites

Most machines come with a half-as* sort of case saver, but they don't work that well. A good quality case saver is worth it's weight in gold. Here is a link to the ones that Rocky Mountain ATV has.

http://www.rockymountainatvmc.com/vehicleFilter.do?prevVehicleType=1&prevMake=7&prevModel=65&keyword=&vehicleTypeId=1&make=7&model=65&applyFilter=Change+Vehicle&year=2003&navTitle=Drive&webCatId=9&navType=type&webTypeId=68&uri=%2FtypeDetail.do

Edited by DirtDemon
Link to comment
Share on other sites

  • 7 years later...
On ‎5‎/‎27‎/‎2010 at 7:03 PM, JasonB said:

I have an 03 ltz 400 that has a crack in the left engine case right by the shifter. Wanting to know if that is a common problem with the motor? Thanks!

Yes very common a lot of times the chain brakes if its not maintained properly. Or the shift shaft gets bent due to hard shiftig

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By mehim
      Hi everyone. 
      Let me explain the thread title. 
      My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy. 
      We are most interested in a side by side unit but would love to get your thoughts. 
      Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit. 
      Thanks for reading and hope to hear from you. 

    • By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





×
×
  • Create New...