Quantcast
Jump to content

1992 Kawasaki Bayou 300 - Ignition Problems

bayouman

By bayouman
in Kawasaki ATV Forum

 Share

Recommended Posts

bayouman Newbie

bayouman

Posted
Posted

I have a 1992 Kawasaki bayou 300 4x4. My initial problem it would not run unless full choke was on. So I tried cleaning carb and installed a rebuild kit and it ran bit better but not much. So I replaced carb and spark plug and regulator/rectifier. During testing of new carb the rectifier burned up so I replaced it. Now it fires up and idles fine but it backfires when you rev it up and then it will die as if the key was turned off. Now I know that the coil, cdi box, and stator are all connected. But I don't want to replace any unnecessary parts . This seems to be a ignition/electrical problem. I could really use some advice here as how to go about this. Thanks.

  • Like 1
bayouman Newbie

bayouman

Posted
  • Author
Posted

I have a 1992 Kawasaki bayou 300 4x4. My initial problem it would not run unless full choke was on. So I tried cleaning carb and installed a rebuild kit and it ran bit better but not much. So I replaced carb and spark plug and regulator/rectifier. During testing of new carb the rectifier burned up so I replaced it. Now it fires up and idles fine but it backfires when you rev it up and then it will die as if the key was turned off. Now I know that the coil, cdi box, and stator are all connected. But I don't want to replace any unnecessary parts . This seems to be a ignition/electrical problem. I could really use some advice here as how to go about this. Thanks.

  • Like 1
  • 1 year later...
watchmaker Newbie

watchmaker

Posted
Posted
On 8/16/2015 at 2:14 PM, bayouman said:

I have a 1992 Kawasaki bayou 300 4x4. My initial problem it would not run unless full choke was on. So I tried cleaning carb and installed a rebuild kit and it ran bit better but not much. So I replaced carb and spark plug and regulator/rectifier. During testing of new carb the rectifier burned up so I replaced it. Now it fires up and idles fine but it backfires when you rev it up and then it will die as if the key was turned off. Now I know that the coil, cdi box, and stator are all connected. But I don't want to replace any unnecessary parts . This seems to be a ignition/electrical problem. I could really use some advice here as how to go about this. Thanks.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • prdicon
      Which ATV hold better value as used
      By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • TomJulio
      TRX300 No spark
      By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
    • marlon smith
      1990 Kawasaki Bayou 300 Intake and Exhaust Pop
      By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • ButchM
      2023 Hisun Axis 700 fuel problem
      By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
    • dkgg5755
      2003 Kawasaki bayou 250 carb problem
      By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...