Quantcast
Jump to content

1999 Polaris 250 Trail Boss clutch issue

mothrottle

By mothrottle
in Polaris ATV Forum

 Share

Recommended Posts

mothrottle Apprentice

mothrottle

Posted
Posted (edited)

Hi,

I'm new to this forum and I hope you can help me out. My '99 Polaris 250 Trail boss does this: shifting in to forward the gears grind a bit. Once in gear the rig wants to immediately move forward. If I don't get to the throttle fast enough, she stalls.If I do, off we go. It happens everytime I shift into gear.Could this be caused by dirt inside the clutch sheaves causing the belt to engage early (before any throttle input)? Or what??? Thanks in advance.

Edited by Ajmboy
Added topic title information and moved to Polaris ATV Forum

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • jen
      Trail Food safety
      By jen
      Wow...I packed a small soft side cooler with an ice pack  at -4 F and inserted my Type K thermocouple sensor inside so I could monitor the temperature without opening.  After 3 hours  the inside temperature was 60  F...OMG!   The ice pack  was solid frozen.   Standard temperature for safe storage is < 40 F.     What I found by asking was that there should be no air space in the cooler.  Packed with Ice preferably ice from connivence store (normally 0 F of less).  Food should take up  short day trip1:1 ratio.
      Good coolers are expensive.
    • Elk
      Throttle assembly spring replacement
      By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • Cj Winds
      2009 Honda Rancher TRX420FA with shifting problems
      By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • LashinWheeler
      2006 Polaris Sawtooth No Spark
      By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • mikeexplorer
      Whiskey Springs ATV trail.
      By mikeexplorer
      We rode here the day before the event. This is a DCNR state forest trail system. The story behind the name is miners would put their bottles of whiskey in the local springs to keep them cold until their shift was over. Part of the trail system is on old strip mines so some areas are barren, others are full forest.
       











COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...