Quantcast
Jump to content

Quad videos! From Spain.

Yuriks

By Yuriks
in ATV Picture and Video Sharing

 Share

Recommended Posts

Yuriks Rookie

Yuriks

Posted
Posted

Forgive my English, I'm from Spain. I share with you my videos with these magnificent creatures. I have a Grizzly 700 and 350. At first to the videos to share with friends. But I decided to open a YouTube channel! Do not you have curious how we ride in Spain? Hahaha. I hope you like the video and enjoy it.

I share my last three videos, but we have more on the channel.  Best regards of a Spanish rider. 

 

Full throttle - Grizzly 700

 


Adrenaline on Grizzly 700 - Grizzly 660

 


Quad Riders | Brutal day - Grizzly 700 - Grizzly 660

 

 

  • Like 1
Ajmboy Grand Master

Ajmboy

Posted
Posted

I agree these are pretty bad as*! What I like is that you guys are taking a sport utility quad to the extreme. Going into and through the water at those speeds is insane, looks like fun!

Yuriks Rookie

Yuriks

Posted
  • Author
Posted

quadnut20 Hello! I assume you mean use the stick circulating. The truth is that I do not know. But it is very difficult for the police you see the countryside. My friend enjoys!

Ajmboy. It's fun, so enjoy the quads. Always the limit! I love to stain mud.

Best regards

  • 2 months later...
Yuriks Rookie

Yuriks

Posted
  • Author
Posted

¡¡Zostard News!!

Very good, how much time. New video with the Grizzly 700, and a friend with Raptor350. I hope you like it! Forgive my English, I'm Spanish.

The channel is not just quads. If you like to run by mountain, I have a video uploading an extinct volcano. In Spain, Lanzarote. Leave link, in case you want to see it.

I take this opportunity to recommend an old video. With friends on quads!
 

 

Best regards, in two weeks new video. If you like them, do not forget to subscribe. Hehehe. ;)

  • Like 1
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Louznmemind
      2007 Yamaha Grizzly 350 carb mixture screw
      By Louznmemind
      (Question is at the end if you want to skip my blabbering) I got this unbelievably well taken care of Grizzly 350 in for a carb clean, it belongs to an elderly couple that bought it brand new in '07. Apparently whoever has been doing their oil changes for them never checked the air filter..
      Obviously it got debris in the carb, it would still run but only idle with slight choke. I've taken it apart and cleaned it, have new o rings, gaskets, etc. As far as the mixture screw is concerned, I'm assuming I obviously need to remove the plug. I'm mainly a lawn equipment guy, I've worked on slide carbs in the past but never an unmolested one with the plug still intact. I hate to mess with it as the carb had very little debris but I'm sure the o ring needs to be replaced at minimum. Finally, the question: what's the best way of removing the plug? I DO NOT want to mess up this carb..



    • Louznmemind
      '07 Yamaha grizzly 350, 2wd gear oil
      By Louznmemind
      Can someone please tell me the fill point on the drive axle? '07 Grizzly 350, straight rear drive, not independent. Thanks 

    • Ajmboy
      Yamaha Grizzly 660 New Seat
      By Ajmboy
      My 2004 Yamaha Grizzly 660 seat is a mess, torn up, cracked, and I have been duct taping it for a while.  I bought new vinyl for $35 and need to do it one day. A new seat used to be well over $250 but now its under $100 so I couldn't resist. I got it on ebay with a 10% off coupon for $85.05 plus tax. https://www.ebay.com/itm/146040022154
      In case anyone is looking for a new seat for their Yamaha Grizzly 😁

       
      I saw it on Amazon as well for under $100

       
    • AnthonyT
      First time ATV buyer
      By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • Frank Angerano
      My first trailer project.
      By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...