Quantcast
Jump to content

Recommended Posts

Posted

Hello,

 

I have a 2006 King Quad that seems to run itself dead after a couple hours of use. I had it out riding my trails and after about 2 hours of continuous riding (only shut off once), it started spitting and sputtering and eventually died. The battery was too drained for the electric start but I was able to pull start it but it was really finicky, ie. Whenever I gave it gas it'd spit and sputter some more and it died two more times before getting it on the trailer. I'm assuming it's a bad stator and/regulator from everything I've read but am seeing if anyone has anything else to add? I used a multimeter and tested the battery. Mind you this battery is brand new and this was the first time I've used it. I had it do the same thing with the previous battery when I was ice fishing and used my portable jump started to get enough juice to get it on the trailer but that day I accidentally hit the switch for my led light bar and they were on for quite a while. I figured it was due to that draining that battery. Definitely seems that the electrical system isn't charging the battery or giving the additional voltage it should.

 

Machine off, fully charged, after hooked up to a tender it read: 12.5v

 

Machine idling: 12.4 and losing 0.01v about every 2min.

 

Revving: didn't increase the voltage at all just kept slowly draining.

 

I do have heated grips and an aftermarket led light bar on it. I've read those can cause a big amperage draw which can overheat the stator coils and cause a short or something to that affect.

 

Any advice is appreciated but I feel ill be buying a new stator and regulator.

 

Thanks!

1bc2ab655963c449639dfba87645e106.jpg

 

Sent from my SM-G930R6 using Tapatalk

 

 

Posted

I'd start by  checking the wires between  stator and regulator. Then  try  a known  good regulator if  you have access to  one. Barring that ,  replace regulator  first. Then  if  still  no  go, replace the  stator.

 

  • Like 1
Posted
10 hours ago, davefrombc said:

I'd start by  checking the wires between  stator and regulator. Then  try  a known  good regulator if  you have access to  one. Barring that ,  replace regulator  first. Then  if  still  no  go, replace the  stator.

I agree, check all your wiring. It sounds like its not charging at all. Great looking quad, I miss my king quad!

* Topic moved to Suzuki forum

  • Like 1
Posted

First check the wiring for breaks in the wiring from the stator to the main wiring harness. Next use a multimeter to chech the resistance between the yellow wires coming from the stator. From one wire to the next it should have less than 2 ohms. A high or infinite resistance between two of the wires indicates an open in the stator wiring which is fixed by replacing the stator.

  • Like 1
Posted

Google for:   service manual for 2006 Suzuki King Quad lta700.   There are a couple of websites where you can download a pdf file of the factory service manual.

Shows instructions for testing the stator (check AC Voltage between each lead from stator with engine running about 1200 to 1500 RPM.  Should be 70 to 90 Volts AC. between each of the 3 legs,

image.png.63a15cc6d72afc0748f18695ac4660ca.png

Also tells resistance (in ohms) between each of above (Yellow) leads ....WITH ENGINE OFF.  Also, should be open circuit (Infinite ohms) between each Yellow wire and GROUND.

Check connector,  Damn cheap connectors used on these quads.  High Amperages heats contacts-- and may burn connectors.  Heat discolors and may melt plastic connector body.

If wiring, stator, and connector are OK, then the rectifier/voltage regulator must be bad.  It can also be checked with a volt/ohm meter.  See Manual.

  Regulators are cheap on ebay.  Part number is:   Suzuki 32800-47H00  (Number is revision to original part number)

  • Like 1
  • 6 months later...
Posted

Maybe too late to help, but I read about running a ground wire from the black/white wire from the regulator (make the connection near the regulator) to the negative battery connection.  Disconnect the battery first.  Do not cut the black/white wire.  Strip enough enough insulation to solder a ground wire to it and then wrap it in electrical tape.

My 2008 would read about 13V at idle (it has a battery maintainer) right after disconnecting the charger and starting it.  After splicing the above mentioned wire, the reading went to 14+ volts at idle.

 

Posted (edited)

Thanks to everyone for their replies. One of my grandfather's friends works on small engines and I had him go through it. It ended up being a bad regulator. He changed it out for me and everything is working great!

 

I'll see if I can close this thread so that no ones else replies but hopefully can read it if they're having the same issues!

Edited by VilRuS
Posted
9 hours ago, VilRuS said:

Thanks to everyone for their replies. One of my grandfather's friends works on small engines and I had him go through it. It ended up being a bad regulator. He changed it out for me and everything is working great!

 

I'll see if I can close this thread so that no ones else replies but hopefully can read it if they're having the same issues!

We don’t normally close any topics unless requested by the topic starter, so in this cases since you reported it and I see in your reply that you would like it closed, I’ll close it for you.

  • Admin locked this topic
Guest
This topic is now closed to further replies.
  • Similar Forum Topics

    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By quadcrazy
      Mud riding is one of the most popular forms of ATV riding, but the wrong tires can leave you stuck fast in deep ruts and swampy trails. Choosing the best ATV tires for mud can dramatically improve traction, steering control, flotation, and overall off-road performance.
      Whether you ride trails, mud parks, swamps, or backwoods terrain, this guide covers some of the top ATV mud tires available today and what makes them stand out.
      What Makes a Good Mud ATV Tire?
      Mud tires are designed with aggressive tread patterns and deep lugs that help clean out thick mud while maintaining traction. The best mud tires usually feature:
      Deep tread lugs Wide spacing for self-cleaning Strong sidewalls Taller tire sizes for added clearance Durable construction for rough terrain 1. Maxxis Zilla

      The Maxxis Zilla is one of the most popular ATV mud tires because it balances mud performance with trail comfort. It is lightweight, aggressive, and performs well in a variety of terrain conditions.
      Why Riders Like It
      Excellent mud clean-out Lightweight design Smooth trail ride Available in many ATV sizes Best For: Trail riders who also spend time in mud.
      2. ITP Cryptid

      The ITP Cryptid is designed for serious mud riding with deep tread lugs and strong sidewall construction. It provides excellent traction in deep mud while remaining durable on rough trails.
      Features
      Deep aggressive tread 6-ply durability Strong side bite traction Great for lifted ATVs Best For: Deep mud and swamp riding.
      3. Outlaw 2 ATV Tires

      The Outlaw 2 has become a favorite among hardcore mud riders thanks to its massive lugs and impressive pulling power in thick mud.
      Pros
      Extreme mud traction Large tread design Excellent forward bite Popular in mud parks Cons
      Rougher ride on trails Heavier than trail-oriented tires Best For: Dedicated mud machines and mud bogs.
      4. STI Out & Back Max

      The STI Out & Back Max offers a solid balance between aggressive mud performance and everyday trail comfort.
      Highlights
      Durable sidewalls Great traction in loose terrain Smooth handling Long tread life Best For: Utility ATVs and hunting machines.
      5. SuperATV Assassinator

      The Assassinator is built for extreme mud riding and features huge paddle-style lugs capable of digging through the nastiest swamp conditions.
      Features
      Massive tread depths Extreme mud traction Available in oversized setups Designed for hardcore mud riders Best For: Extreme mud builds and dedicated swamp riders.
      Choosing the Right Mud Tire Size
      25-27 Inch Tires
      Great for stock ATVs Less drivetrain strain Better acceleration 28-30 Inch Tires
      Balanced performance More ground clearance Popular for trail mud riding 32+ Inch Tires
      Maximum mud performance Best for lifted ATVs Ideal for deep swamp riding Larger tires may require clutch upgrades, lift kits, or gear reductions depending on your ATV.
      Bias vs Radial Mud Tires
      Bias Ply Tires
      Stronger sidewalls Better puncture resistance Popular for aggressive mud riding Radial Tires
      Smoother ride quality Improved handling Better trail comfort Most serious mud riders prefer bias-ply tires because of their durability in harsh terrain.
      ATV Mud Tire Maintenance Tips
      Wash mud off after every ride Check tire pressure regularly Inspect sidewalls for damage Rotate tires periodically Avoid excessive pavement riding Lower tire pressure can improve mud traction, but beadlock wheels are recommended for very low PSI setups.
      Final Thoughts
      The best ATV tires for mud depend on your riding style and terrain conditions. Riders who split time between trails and mud often prefer versatile tires like the Maxxis Zilla, while hardcore mud riders typically choose aggressive options like the Outlaw 2 or Assassinator.
      Before upgrading to oversized mud tires, make sure your ATV can handle the added weight and drivetrain stress. Proper setup can dramatically improve your ATV’s performance in deep mud and swamp terrain.
      Visit QUADCRAZY ATV Forum for ATV tire reviews, mud riding discussions, builds, and technical advice from fellow riders.

      View full post
    • By Admin
      Does anyone use GPS, whether on a device or app to record their ATV trail rides? I have been thinking about a section where our members can upload let's say a .gpx file and share their rides on a google map for others to see where there are riding areas. Not sure if this is something of interest or how much it would be used, so just trying to get an idea.
      Importing routes from files like xml, lmx, tour, freshroute, gpx, kmz, kml
    • By joezee13
      After turning off engine in neutral  starter wont engage If I rock unit back and forth it engages Getting progressive worse.
    • By middlebrookgt
      Hi All.  I introduced myself some weeks ago with my 2006 LT-F400F that needed a list of repairs including replacing the cracked generator cover.  It is back together as of last night and cranks up, idles and revs high pretty well.  Needs some fine tuning and stop backfiring at stop.
      The big issue is it will not go into gear.  I reassembled the insides with help from y’all’s posts.  The transfer selector moves from H-L-R, and the foot shifter moves thru the gears and finds neutral easily enough.  Before I tear it back open, the  transfer selector on top does not move as far as the repair manual says.  The diagram shows the shaft moving something like 40 degrees between L and H and 50+ degrees between L and R but it doesn’t move that far even though it finds the indent areas and moves well.  
      Could this be the problem.  I aligned all the dots on the shifter gears inside and it appeared to not be binding anywhere.  I do hear the gears touching when I shift like they are trying to engage, but zero movement from the ARV
      It was somewhat difficult to tell whether all the parts are installed on each shaft.
      Are there better/bigger photos somewhere that would allow me to be confident I included all the washers and bushings, etc?  If I had any doubt on parts that were laying inside after the cover broke then I purchased replacements from online stores.
      TIA for any input or feedback!!  Pics are from when I first took the generator cover off.


×
×
  • Create New...