Quantcast
Jump to content

Recommended Posts

  • Ajmboy changed the title to 1998 kawasaki bayou 220 Fuel Starved
Posted

Air filter brand new. Aftermarket carb. Trying to replace stock Mikuni. Slide needle and brass mating tube wore out. I just installd carb. Backed out air fuel screw 2 turns and fired it up. It seems to lose power on top end. Like its hitting a rev limitter. Then backfires on way back down thru rpm's.???

Posted
11 hours ago, Hayden Pahnke said:

Seems to be not getting enough gas past half throttle. Should i go up 1 size on main jet? Please help.

If its a factory replacement carburetor, you shouldn't have to change the jet size. Sounds like you have either an adjustment issue.  

Posted
2 hours ago, Hayden Pahnke said:

HA HA!!! Got it! Stock main jet is 110. Bought a 5$ 112.5 main jet, PROBLEM SOLVED. RUNS AWESOME.

Great news! Glad you figured it out. That's the problem with aftermarket sometimes. 

  • 2 months later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
×
×
  • Create New...