Quantcast
Jump to content

Recommended Posts

Posted

Bought new in 1985 a Honda 250 Fourtrax.  Have used on the farm all these years.  I have performed a tune up but she is still running rough.  Took off the carb and cleaned it out really good.  Seemed to help but still won't idle just right.  Looking to by a new carburetor but have found out that the original OEM carb has been discontinued.  I looked on line and there are many after market carbs available, some state they are plug and play and some are not.  Can anyone recommend a carb that will be a factory fit?  I was going to try and re-build the old one but the screws are seized up and almost broke trying to get them backed out.  Thanks.

Posted

I would buy a new carburetor if I were you.  Plug & play sounds good.  I rebuilt my 85 Honda 250SX trike carb. a few years back with no problems.  You could try to soak it like crazy to loosen things up.  Keep us posted.

  • Similar Forum Topics

    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
×
×
  • Create New...