Quantcast
Jump to content

Recommended Posts

Posted

Ok well as long as you have dash lights. It’s something holding the start circuit out. Is the bike in neutral and start checking all the safeties as well as the starter circuit.  Put a voltage tester on the battery and hit the start button.  If the voltage drops the starter may be jammed or bad.  You can also put a tester on the starter wire and see if the starter get voltage when you press the start button.  Do you hear any clicks coming from the starter relay under the seat ? Or any place else on the bike when you press the starter? 

Posted (edited)

Check the kill switch, left handlebar, red switch,  that would prevent the fuel pump from pressurizing.

Check ignition fuse (IGN on the fuse block) it could have popped and you would still have dash and headlights, but the pump won't pressurize.

On these machines, the start circuit would only prevent the starter from engaging, the fuel pump will still pressurize. Arctic cat machines allow you to start the machine in gear only if the brake is engaged. There is a relay called "start in gear" but I don't think this is his problem.  It is either the kill switch or something in the IGN circuit.

Since this is an EFI machine, battery condition is very important, battery may appear to be OK, but only a load test could verify that.

 

Mike

 

Edited by mikeexplorer
  • Like 1
  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

×
×
  • Create New...