Quantcast
Jump to content


2012 CFMOTO X5 Reverse Lights


redneck999

Recommended Posts

Most of these bikes have a reverse switch on the shifter side of the engine. You should find two wires that come out of the engine near the shifter.  One is usually a neutral safety switch that indicates the bike is in neutral and is clear to start.  The other is a reverse light wire that shows you on the dash that the bike is in reverse like @06kfx440 mentioned. 

When you put the bike in reverse that switch is grounding the reverse light and makes it come on.   So in theory all you would have to do is wire a reverse light as so, positive wire connected to the battery with an in-line fuse (must have for protection) and then attach the ground wire from the light to that reverse light wire coming from your neutral safety/reverse light switch.   Of course you would have to look at your bike to make sure it works the way I’m stating or your manual to show what wire to connect to but a tester can do that for you also.  But each manufacturer is different but mostly all of them use the grounding type system.

I agree with @06kfx440 about tapping your dash light but most of those indicator lights are super low amperage and may not carry the load of another light on the line.    

 

Link to comment
Share on other sites

  • Admin changed the title to 2012 CFMOTO X5 Reverse Lights

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Need-help-with-quads
      So I have an 89 Yamaha moto 4 250cc and when I ride it, itll get hot after like 10-15 mins and then will just die and turn off.
      It's has new carb rebuild, new air filter, new battery, new spark plug so I don't think it's a crack in the spark plug
      Can anyone help me?
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By 1998Zuki250
      Anyone here ever have any issues with the law for riding on public land? Im in upstate NY and they seem to ruin everything so Im over cautious. 
×
×
  • Create New...