Quantcast
Jump to content

06kfx440

Members
  • Content Count

    273
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by 06kfx440

  1. Your high idle may be an intake boot or a disconnected filter or a vaccume leak somewhere. Sent from my SM-N920V using Tapatalk
  2. Hmm. Take a trip to Lowe's and see if you can get a cap. But that's a tough one. I never did a temporary mod like that. Frank? Sent from my SM-N920V using Tapatalk
  3. Check your carb again. Your float might be off and overflowing the carb internally. Make sure the carb is in spec. If your getting spark and timing is in spec on the valves, then to much fuel will foul the plugs and prevent it from firing. Sent from my SM-N920V using Tapatalk Also there are timing marks on the stator side thru a plugged hole. You will need a screw driver to pull them off. Then take the hole center of the casing and put your socket in there. Turn the motor and align the timing at tdc. Then check your cams. Sent from my SM-N920V using Tapatalk
  4. Look at the way it spins. If it's counter then it's left. Opposite if it spins right. Sent from my SM-N920V using Tapatalk
  5. It's a cable issue. It stretched. I'd replace it with oem but aftermarket sometimes works. While your at it. Replace the choke guide as well. Might as well do it since you'll be in there Sent from my SM-N920V using Tapatalk
  6. Doing this today. Sent from my SM-N920V using Tapatalk I meant this ?[emoji115] Sent from my SM-N920V using Tapatalk
  7. Well. From your pics. It looks like the p/o removed the entire front half of the 4wd. To start, I would buy the front axles, differential, & the drive shaft that connects to the trans. Would you happen to know if the 4wd engages Sent from my SM-N920V using Tapatalk
  8. Big bore kits are around 400. You can do cams, timing advance, rev limiter box for more rpms. Port the head and intake. Port the carb. And so on. It depends on what your looking for. I have the 440 kit and stage 2 cams and keep up if not pass the 450s. Sent from my SM-N920V using Tapatalk
  9. That's my mission for the next week. Paint removal Sent from my SM-N920V using Tapatalk
  10. I'm thinking wrong routing of hoses or could very well be missing hoses. Sent from my SM-N920V using Tapatalk
  11. How did your quad run Sent from my SM-N920V using Tapatalk
  12. All good brother. I can travel too. Also have a few guys that all travel to different spots. Let me know what's up. Sent from my SM-N920V using Tapatalk It's a mix of everything. But everyone rides something different Sent from my SM-N920V using Tapatalk
  13. I [emoji173] [emoji117]( . ) ( . ) [emoji118] Sent from my SM-N920V using Tapatalk
  14. Sounds like he's mixing the air fuel mixture instead of the idle screw Sent from my SM-N920V using Tapatalk
  15. Looks great. How was pulling it along. Did the front end seem loose? Sent from my SM-N920V using Tapatalk
  16. That's fun. Lol. Run a tap thru that hole. Sent from my SM-N920V using Tapatalk
  17. That's a better explanation than I gave Frank. But same principal. Sent from my SM-N920V using Tapatalk
  18. Well. The worst that can happen is bolts rattle loose and break things. But sometimes you can get lucky if you have a feel for ft lb strength. Sent from my SM-N920V using Tapatalk
  19. Yes sir. Everything you need to know is in the manual. You would need a torque wrench to achieve proper torque. Most have patterns to torque which can also be in the manual. Sent from my SM-N920V using Tapatalk
  20. Every cylinder is different depending on stoke and piston size. Smoking is told by color of smoke. White or blue is oil or gas. You would have to smell it and see how it performs. Black is oil or rich. Again, smell it. Sent from my SM-N920V using Tapatalk You would get your readings out of the manual or a simple search on Google. Sent from my SM-N920V using Tapatalk
  21. That has to be close to a 5x8 Sent from my SM-N920V using Tapatalk
  22. I would say for your best bet, buy oem. You can't go wrong. Off shore carbs work but you'll never truly dial it in. Sent from my SM-N920V using Tapatalk
  23. Would your truck fit your quad. I know I struggle with my kfx. That s why I bought a trailer. Sent from my SM-N920V using Tapatalk
  24. Do it bro. You'll be really happy. But no more pavement riding. That would feel like a lifted truck with aggressive tires that you feel everywhere. Sent from my SM-N920V using Tapatalk

×
×
  • Create New...