-
Posts
454 -
Joined
-
Last visited
-
Days Won
19
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Everything posted by 06kfx440
-
Probably the 06. The Polaris is in the shop being looked into. Dropped that off last week Sent from my iPhone using Tapatalk
-
Are you still coming up this weekend? I plan on being there from dusk till dawn. Sent from my iPhone using Tapatalk
-
I’m going to keep it. I want the ability to either bring my kids out with me or my friends. Or just sell it for another 4x4. I have a bunch of land I maintain after my losses. Sent from my iPhone using Tapatalk
-
This weekend brother. I got my kfx back. That scrambler was clapped. Sent from my iPhone using Tapatalk
-
I’ll be paying cash. So I could walk out under 6 Sent from my iPhone using Tapatalk
-
I agree. 6k isn’t a lot for new. My only issue with used is if something brakes, it’s on me to fix. I just can’t do it anymore. You know that bro. Lol. But on another note. Which brand. I have reputations with them all. Sent from my iPhone using Tapatalk
-
I want a new quad. I need automatic and 4wd. It needs to plow snow. Pull a grass cutter. And be able to tow 1500 pounds. Plus be sporty enough to tear it up while having fun. I have a balance of 6k. Ready? Go!!!!!!!!!!! Sent from my iPhone using Tapatalk
-
What do you use to clean your ATV?
06kfx440 replied to Frank Angerano's topic in General Talk - Anything Goes!
I have a husky. It’s electric and it definitely does the job. I think it’s 80 psi but could be more. My sticker wore off. Lol. But for sure there is an 8xxxsi Sent from my iPhone using Tapatalk -
What do you use to clean your ATV?
06kfx440 replied to Frank Angerano's topic in General Talk - Anything Goes!
I have used this product from dg. It’s called totally awesome. Between that and a power washer. I get great results. Sent from my iPhone using Tapatalk -
Ok. Definitely air cooled. From what I see it’s a 250 or even a 300. How did the oil look. If the piston and walls look that way then there is metal in the case and you will have to split the cases to clean it out. It’s really not a big job. I had mine out and apart in a hour Call around to bike shops and see the cost to hone and bore. Then choose the route you want to take. Used isn’t a bad idea either. But new and oem is your best bet. Sent from my iPhone using Tapatalk
-
I wouldn’t just slap a new piston in there and call it a day. How is the oil and coolant Sent from my iPhone using Tapatalk
-
By the sound of what you just said, no oil is bad. I always run a 32:1 mix when I get a 2 stroke initially. But even if the oil tank was full doesn’t mean it works. The way to check that it works is to run the machine and pull off the oil injector to watch it drip oil. I’d check the crank bearings and wrist pin bearings since that heads off I’d replace the cylinder. It’s cheaper to buy new than to hone. If money is a factor then replace the piston. Run your fingernail across the cylinder wall and feel if it’s gouged. Sent from my iPhone using Tapatalk
-
cranks but won't start
06kfx440 replied to bradleyheathhays's topic in General Talk - Anything Goes!
Hey guys. This is a 96 Jeep. Not a quad or snowmobile. The only time to check the carb out that way is 87or older Pre obd 1 Sent from my iPhone using Tapatalk How is your compression, any check engine lights? Sent from my iPhone using Tapatalk -
cranks but won't start
06kfx440 replied to bradleyheathhays's topic in General Talk - Anything Goes!
-
Awesome frank. They are fun machines even tho it’s a 250. Again. I have the service manual if you need any info. Sent from my iPhone using Tapatalk
-
Hell no bro. I’m not about that. I am disabled but I pay my way. I never look for a hand out. Sent from my iPhone using Tapatalk
-
Another? Excuse me? If the building department passed it and it fails. You would think the building department didn’t inspect it Sent from my iPhone using Tapatalk
-
My retaining wall fell 20 feet up my driveway from the entrance. I called my insurance company and was told that there isn’t a lot they can do. So I called the town to see who built it and the old homeowner did 4 years ago! With no contractor! And the building department passed it for inspection. There is no geo grid, no drainage, and dirt as a backfill. I bet you I can pull the rest down by hand. My question is who is responsible? This is not right. Sent from my iPhone using Tapatalk
-
Here’s 3 or more from amazon. Sent from my iPhone using Tapatalk
-
Good job brother. I’d do the same thing if I had to. No one said it would be easy but it works. Sent from my iPhone using Tapatalk
-
500 quadmaster sputters an backfires after warmup
06kfx440 replied to paul d's topic in Suzuki ATV Forum
Did you replace the choke cable? How about cleaning the jets ? Sent from my iPhone using Tapatalk -
Sounds like a blast mike. Would you know the distance from nyc or the cost? You didn’t leave a name or anything. Just a location. Sent from my iPhone using Tapatalk
-
That looks to be a decompression valve. Do you have a pull start? Sent from my iPhone using Tapatalk
-
That was my thought too frank. You can tell what happened by pulling the jug off. Sent from my iPhone using Tapatalk