Quantcast
Jump to content

Recommended Posts

Posted

I tried to turn my Warn Vantage 2000 into neutral to spool out the line and the clutch is very stiff... I got it.

When trying to engage it again, it was also very stiff and I ended up breaking off the thumb tab -- so I guess I will need to buy a new gear end housing for that.

Anyway, is there some maintenance that is needed to keep the clutch turning smoothly or some trick I am missing?

Posted

Eventually they pick up mud and crap and will need to be cleaned out. I had my original WARN winch for 10 years and always worked well. I would take it apart every few years and clean it out. Sold it with the machine and it was still working well. One trick I use is when I am ready to wind the cable back on to the spool I use one of those battery jump boxes to power it to wind the cable back on. This way I can hold some tension on the cable so it lays on the spool better.

Mike

 

  • Like 1
Posted

I ended up taking apart the gear housing, cleaned everything, greased it up and got it back together, but for some reason the clutch is still very stiff to move.

Anyway, because it is a Warn and only 1.5 years old, I dropped it at the Warn service center so they can bring it back to working condition and fix the part with the broken thumb tab too. I don't really like these winches with the round clutch -- hard to grab onto and turn when you are sinking in the mud hole. I probably should have bought the provantage 2500 -- it looks to have a better clutch setup.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By quadnut20
      Just picked up a 2025 Yamaha Kodiak 700 fixing to do a EPI Clutch mod to it since I dropped bigger tires on it !! Air box , exhaust , and programmer next ! 

    • By wilmpie
      hi everybody
       
      I have a kymco mxu 250 automatic from 2006 250 cc  that keeps going forwards or backwards when i shift backwards or forwards an then shift to neutral .
      if i shutdown the motor and push the quad and restart then its in neutral and don't go forwards or backwards, i already checkt if my motor is running good stationairy .
       
      what can it be or what can i do to fix this?
      thanx in advance
      p.s. Sorry for my bad english it's not my first language.
       
       
       
    • By T37Mark
      HI everyone. New to this forum. I have 98 Kawasaki Bayou 400 with an apparent electrical issue. I have the Clymer manual, but I am not exactly sure where to start. The issue started a month ago and the neutral light would go on and off intermittently. Eventually it went completely off , and I thought it was a shifting issue. I took the case off and checked the clutch and all mechanical shifting components are good, so I think I eliminated that. The switch sometimes works, sometimes doesn't. Last time I tried, I did hear a clicking sound near where the battery is right before the light went out. Does anyone have any ideas where to start? Hoping this is an easy fix.
×
×
  • Create New...