Quantcast
Jump to content

Recommended Posts

Posted

Having serious problems with quad it completely stopped running on me took carb off and tore apart cleaned everything put back on and it started idled but when driving it had no power at all so took carb back off and noticed their was a puddle of gas and oil in the bottom of the air filter box and also their was gas in the vacuum line HELP

Posted

Hey @Amboyjim welcome to Quadcrazy! 
Check the diaphragm on the fuel pump. If the diaphragm is bad and gets a hole in it the fuel gets sucked into the carburetor via the vacuum line and floods the engine and winds up getting kicked back into the air box.   
 

Also when you set the air fuel screw after the carburetor rebuild did you set it properly?  

  • Like 1
Posted

Thanks for the help the diaphragm is good and still in the process of rebuilding it again waiting for new parts to come in and I havent done a compression check yet maybe I should do that after I get the carb back on 

  • Like 1
Posted

yea theres definitely a carb issue going on.  does your quad start sputtering once it gets hot and trying to cut out on you?  just wondering because i had a yamaha warrior that was collecting gas and oil in the airbox and it would run awesome until it warmed up and then it would quit

and that bike didnt have a fuel pump- just gravity fed

  • Like 1
Posted
On 4/3/2020 at 6:52 AM, Frank Angerano said:

It could be a bad rectifier also once it gets warmed up.  Very possible.   

yea i didnt think about that..  i was pretty sure with my bike it was due to me rebuilding it with a used piston and rings off another atv that i rebuilt lol.  but it could be the case with your atv

  • Like 1
  • Ajmboy changed the title to 2002 Suzuki Vinson 500 Stopped Running

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By Jason39
      I’m having a issue with my choke when its on it runs fine when I cut the choke off the atv cuts off went to take the carburetor off and saw the choke plunger broke at the nut to screw it in could this be my issue? Do I just need to buy a plunger kit and put it on? I took the carburetor off and cleaned both jets anyway just to make sure and it’s still having issues staying on
         
    • By austinfuller22
      i have a lt 230 and the e start isnt working but i dont know why
      can i have some help
    • By davefrombc
      Anyone  carrying  a power box when  camping with their ATV?  I built  a custom  one.  I  used a  marine  battery box that  has 2  50A Anderson Grey connector  outputs (  changed one of the greys to a red), an accessory socket  and2  USB outlets,and a battery  voltmeter ..  I  added a Pure sine wave 1,000w inverter to it and A red 120A Anderson connector to the  output  posts.. To  charge the  100Ah LiFePO4 battery  I  put in the box, I added  a DC to DC charge adapter that I  made input connectors for to allow charging the battery from a vehicle's  accessory socket  or a solar panel.   
      It  was a fun  project.. Besides  having a  1,000w power box for  120V ac , USB   and  12v accessories using the 10 A socket.  I  have  50  A  Anderson connectors  and the 120 A connector  to run  things like a  12v electric outboard   for fishing  trips .  The LiFePO4  battery  only allows a max output of 100A  so  it  can't be used for something like jump starting,  but  it  is half the weight and  delivers twice the capacity of a lead acid battery running accessories..  Commercial pow2er  boxes  don't  deliver  high draw 12v output to run things like  the  electric outboards.   That's one reason  I  custom  built  mine.   One box that serves for both camping and fishing.
       

    • By dkgg5755
      Im not getting 12v to ignition switch with key off or on I've jumped brown wire from starter relay to positive and neutral light comes on and push button start works. Can't figure out where to go from here any help appreciated l.
×
×
  • Create New...