Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hi all, new here and trying to figure out an issue with a Bayou 220 I just got. It sounds (to my novice ears) like it ticks more than other engines I’ve heard.  I also hear it occasionally backfire (briefly) and the engine gets very hot (I’ve never run it enough to shut down).

I’m thinking it needs a valve clearance adjustment but I’m wondering if any other experienced Bayou owners or anyone else has any ideas before I start tearing into something I don’t need to?  Thanks everyone!

Edited by Khanh845
  • Khanh845 changed the title to 1995 Kawasaki Bayou 220 ticking noise
Posted

If you haven't done this yet,  I would change the oil, check the air filter, and check/replace the spark plug. Any difference in running when you apply the choke? 

Posted

Thanks for this. I can definitely do that. I don’t know when it was last changed since I just picked it up but can I ask why or how that might make the ticking sound? 

Posted

well I adjusted the valves four times. I tried setting it at the low and high end of the range in the service manual and it still ticks. I wonder if there’s just something wrong with he valves themselves or something more. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
×
×
  • Create New...