Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hi all, new here and trying to figure out an issue with a Bayou 220 I just got. It sounds (to my novice ears) like it ticks more than other engines I’ve heard.  I also hear it occasionally backfire (briefly) and the engine gets very hot (I’ve never run it enough to shut down).

I’m thinking it needs a valve clearance adjustment but I’m wondering if any other experienced Bayou owners or anyone else has any ideas before I start tearing into something I don’t need to?  Thanks everyone!

Edited by Khanh845
  • Khanh845 changed the title to 1995 Kawasaki Bayou 220 ticking noise
Posted

If you haven't done this yet,  I would change the oil, check the air filter, and check/replace the spark plug. Any difference in running when you apply the choke? 

Posted

Thanks for this. I can definitely do that. I don’t know when it was last changed since I just picked it up but can I ask why or how that might make the ticking sound? 

Posted

well I adjusted the valves four times. I tried setting it at the low and high end of the range in the service manual and it still ticks. I wonder if there’s just something wrong with he valves themselves or something more. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By bigfatkahuna
      Hello all, I'm new to ATVs. I have a friend moving away and he made me a great deal on his 2007 King Quad. I couldn't resist.  So here I am trying to figure things out.
      I figure I'll start with an oil change and work on registration.
      I'm in Colorado so I'll be looking for some adventure soon.
      I'm sure I'll have plenty of questions and hopefully be able to help someone with answers too.
       
    • By digrig
      Hey everyone,
      I’m having an issue with my 2021 Polaris Sportsman 570 – the engine keeps stalling after running for about 10–15 minutes. I’ve checked the air filter, spark plug, and fuel lines, but can’t seem to find the root of the problem. It starts up just fine, but then loses power suddenly.
      Has anyone experienced a similar issue with this model/year? Would appreciate any advice or troubleshooting tips you’ve tried that worked. Thanks in advance for your help!
×
×
  • Create New...