Quantcast
Jump to content

Suzuki LT80 no start, no nothing

T_odie

By T_odie
in Suzuki ATV Forum

 Share

Recommended Posts

T_odie Newbie

T_odie

Posted
Posted

Hey guys, hope you can help me out here. I was gifted an early 90s LT80 and it had sat outside for a couple years. Upon inspection I noticed the wiring harness was all chewed up and had couple splices. I tried to get it to work and was getting nothing when I pressed the start button so instead of messing around with it more. I just ordered a new wiring harness along with a starter relay.

 

I have everything hooked up but the clip on the new harness for the CDI/coil is 4 prong when the cdi/coil is 2 prong. Is there anyway I can splice this into the two prong adapter or do I need to get a new cdi and coil.

 

Also is there a way to test the start stop switch on this as I’m narrowing down why I am getting nothing when I try to start it. Relay doesn’t even click. I have sliced the brake switch and the reset button wires together and am getting nothing. Shouldn’t it still be turning over without spark if the coil isn’t connected?

 

Please help and thank you

 

 

Sent from my iPhone using Tapatalk

  • Ajmboy changed the title to Suzuki LT80 no start, no nothing
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Arizona
      2006 Suzuki Eiger 400 4x4 wiring diagram
      By Arizona
      Just recently bought a dead 06 Eiger, Can someone post or send me a wiring diagram for it:? 
      Need to check all wires, no power in most places, Cant seem to read the ones from online manual,
      too blury and cant tell wire color. Just too small. Thanks Az
    • Peisledder
      MAP wiring for 2012 Sportsman 550
      By Peisledder
      Hello, can someone help me? I have a MAP error code 102-3, and the MAP has 4 wires: light blue, orange, purple, yellow. I’m getting different results on what the wires are. I don’t have wiring diagram. Can someone confirm which is ground, 5v, MAP, and Temperature?
    • davefrombc
      Trailer Wiring
      By davefrombc
      I added a pdf of  the wiring of the various connectors used in vehicle socket  and trailer plug wiring to the  "Other ATV files"  section in downloads.
    • neilroy87
      1990 Kawasaki Bayou 220 wiring issues
      By neilroy87
      I have a 1990 Bayou 220 that runs pretty well for it's age--needs a new muffler, but sounds tough.    Have had to start with a pull cord since I got it, and recently started troubleshooting the start button.  Finding a lot of information on this issue in the forum, but haven't been able to chase it down yet.  Got a new battery, new starter solenoid, and going to replace the starter relay this week, but not convinced that's going to do the trick, since I can't get the neutral light on when turning the key on.  I can start it by jumping the solenoid, but the 2 black wires to the relay do not activate the starter.  Bad ground or a short somewhere?  Is there a good way to just test the ground?
    • carkivey3
      2008 kazuma 800 4x4. i need wiring help. no spark
      By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...