-
Popular Now
-
Similar Forum Topics
-
By prdicon
I was looking to buy a new ATV.
I was debating between Polaris sportsman 450 and Honda rancher.
Polaris it a bit cheaper.
But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
Let's say 3-5 years from now.
-
By skeeter45
I just bought a 93 350 Big Bear. I noticed 3 things right off. #1. No recoil start. It has just a cover. Difference #2 Key switch is on right front fender. instrument cluster is different than all I've seen. Am anxious to get it running.
Thanks for your help
-
By Rich1028
Good/Better/Best +1 A-Arms honda 400 X 2008-2014
What are some of the good, better,and the best 1+ a arms out there?
where does Houser Racing Fall?
https://www.houser-racing.com/Honda-400EX-1-Standard-Travel-A-arms-p/030107-01.htm
JD Performance
http://www.jdperformance.net/488_Web_Design/a_arms.html
and something found on ebay
https://www.ebay.com/itm/TRX-400EX-400EX-1-A-ARMS-SALE-SILVER-VEIN-LIFETIME-WARRANTY-GNCC/372763670824?hash=item56ca723928:g:qwIAAOSwJkZddV2x
-
By bcsman
Just bought this Honda quad and when I first drove it the steering seemed very hard. Those that I talked to said that's normal as it's full time 4 wheel drive. Well yesterday while looking from the front is looked like the front tires were pointing out quite abit. I measured the toe and was toe-out by a little over an inch. Yikes so this morning decided to try an adjustment and after an hour or so had the toe-out to 1/4". Took for a test drive and the steering was alot easier, still not like driving a 2 wheel drive but made a huge difference. There are differences as to what the toe should be set to but so far this seems to do the trick.
-
By paul brewer
I am sorry to ask such a stupid question but I would like to share my story.
I bent my stock axles and bought 2 rear rzr 800 axle shafts from Hexautoparts.com.These " RZR 800 cv joint axles" I received are different from mine,the length and splines are different.
So I am guessing whether this seller shipped the wrong rzr axles or I bought wrong ones.After check I made a mistake my ranger is the RZR 800S,the rear rzr axles I bought are for RZR 800.I will return the wrong RZR 800 axles to exchange correct RZR 800S.
If I haven't overlook "S",this trouble should not have happened and could have been completely avoided.Hope riders who have RZR 800 or RZR 800s take carefully when need to buy parts or accessories for his rzr.
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.