Quantcast
Jump to content

Recommended Posts

Posted

I have a 97 Suzuki kingquad an a new carb an yet still flooding an sounds like it wants to start but won't. Flooding so much that while cranking over gas is actually spraying out the back of the carb.  I'm thinking maybe need new fuel pump an check my vaulves an timing. Also don't know how many p.s.i. the fuel pump is an can I switch over to an electric on????

  • Admin changed the title to Need help!!! 1997 Suzuki King Quad No Start
Posted

If that's a new carb, it shouldn't be doing that. Sounds like a carb float or jet issue. Electric fuel pumps are for fuel injection, you should have a mechanical fuel pump. Gas spraying out the carb sounds like its under pressure. 

If you have a 300, here's a good video illustrating a mechanical fuel pump and delivery.

 

Posted

It is possible that the fuel pump is at fault but not that likely. They only make a couple PSI which assists in bringing gas uphill to the carb when the fuel is low in the tank. When they fail it usually results in a lack of fuel, not too much.

What I suggest you try is a simple test: remove the original fuel line at the carb & get a clear hose of the same size. Connect the hose to the carb and fill it with gas. You need to support it vertically and watch the level in that clear hose.

If it drops and cannot hold that level, the problem is with the carb - float valve or float itself is bad. Sometimes it takes quite a while for the level to drop but be patient, I've seen many carbs fail this test! Worth a try and it's cheap!!

Posted

Spock58 is correct. Pulse fuel pumps aren't capable of producing too mush pressure. You most likely have some debris between the float needle and seat is the carb. or the float needle is out of place, or the float or needle are sticking or stuck for some reason. A quick inspection  and cleaning will probably solve the problem. You can retest it like Spock58 says before reinstalling it as well to see if you have the problem resolved. make sure the float bowl gets completely full and fuel and the tube is staying full also. A small auxillary fuel tank might be helpful here as well.

Posted

Check the vacuum hoses going to the fuel tap and the fuel pump, they might be sucking fuel down them and into the engine. They could also be leaking all the time and fill your sump with fuel. Check the oil level and smell looking for fuel.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
×
×
  • Create New...