Quantcast
Jump to content

Recommended Posts

Posted

Put in new carburetor, battery is good, 30a fuse in starter relay good whe I push start button  nothing happens except buzzing sound from batt. All lights come on. Won't start with pull cord either. 

Posted

You probably have a bad connection somewhere, or a dud battery. The bad connection could be on the power wires/cables, or on an earth wire/cable. I think we should get that fixed first, then check the no start.

When you push the button and the buzzing happens, does the dash or warning lights go out ? And, if you turn the headlights on and push the button, does the headlight go dull ?

Can you tell us about the circumstances..  did it have the buzzing before the carb, or any work, has it been parked up or ridden regularly, have you had it long ? Anything else you can think of to tell us about it's history ?

 

  • Like 1
Posted

battery good, connection is good, iv had that happen with a bad relay(soloenoid), the one with the 30A fuse, sometimes they just get old and stick, you might tap it gently with a hammer and see if it goes, or even the starter gets brush dust down in it and won't go , may try tapping that with a hammer , only after you make sure your battery is good. Mine was doing that when I would first try to start it, I knew I had put the wrong size battery cable on it when I was redoing the electrics, I used a lawn tractor cable thought sure it would be enough even though it was physically smaller, replaced it with OEM cable and never had another problem. My long winded point is check your battery cables also.

Oh one other thing the 2093 Kodaks will probably be lithium crystal powered. 

  • Like 1
  • Admin changed the title to 2003 Yamaha Kodiak No Start

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...