Quantcast
Jump to content

Recommended Posts

Posted

just got a Honda ATV200ES today for free and it seem to be in good shape! The last owner said it wasnt getting a spark. There is no battery in it yet (does it need one to spark?) Where do i need to start on this thing and is there anywhere i can find the specs? ie..compression valvel clearence ect. Any info on this would be great, thanks

Posted

1984 was the First and only yr for the 200ES..Went to the 250ES in 85..Nice to have Shaft drive with reverse....

The battery is only there for the ES....You have the Back up pull Start.....I do think though you have to have something there to Complete the Circuit for it to get spark....So,,,,New battery might be needed if you dont have anything there....

Here is a wiring Diagram

ATC200ESx84.jpg?t=1223734989

Frame number JH3TB0554EC300001~

Engine number TB05E-6000001~

Engine type 4 stroke, Air cooled

Displacement 192 cc

Bore x Stroke 65 x 57.8 mm

Compression ratio 7.8 to 1

Compression 142 - 170 psi

Transmission speeds 5 speed with dual range & Reverse

Clutch Type Automatic

Oil Capacity 1.43 Qt

Carburetion 22 mm Keihin

Starting system Electric with recoil backup

Fuel capacity 3gal with .03 reserve

Wheelbase 48.4 in.

Overall Length 72.8 in.

Overall Width 42.1 in.

Ground Clearance 5.9 in.

Seat height 27 in.

Front tire 25 x 12 x 9

Rear tires 25 x 12 x 9

Front suspension Telescopic Forks

Rear suspension none

Front brake Drum

Rear brake Drum

Final drive Shaft

Dry weight 375 lbs

Approx. retail new $1,848.00

Posted

free is a good price! REM to change the oil cuz most folks never check them, like lawnmowers.....

clean, fresh oil will make it happy and bring the compression up.

Typically Honda machines need a battery to run, I suggest you talk more with MYKE as he sounds very familiar with that model.

!!WELCOME WHEELER!! I'll be happy to help! I have 3, cant compete with MYKE.......;p

Posted

WOW thanks for the response! wiring diagramed saved to the comuter for refernce. Put a dead battery in and checked voltage from the stator that was good, chaecked all the way to the coil in and got good voltage but nothing out( pluged in a coil off a Isuzu Trooper and got volage out ) oredered a new coil for $44.00 bucks will be in soon I'll let ya'll know about the out come and try to post some picks.

This is a great forum thanks all for your help.

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...