Quantcast
Jump to content

Recommended Posts

Posted

My old rear fender had a large crack on it, whoever had it before me wire tied it, lol i bought a used fender has some scratches on it, im sanding it a bit with i think 800 grit. should i wet sand aswell? whats the best paint for plastic? should i primer?

Posted

so what i did is, wet sanded with 1000 grit, primer with some white junk that looks like snow, then wet sanded again, painted with kyrlon, looks good but will do anbother coat, just wanted it to look half decent!:)

Posted
ive bought enough stuff for my quad already im not going for best in show. it looks fine now, but i may get some clear coat. then i'd have to redo the front fender haha.

If you put a few coats of clear on it, when you scratch them it scratches the clear coat not the paint.

Posted
for a added touch spray some glow in the dark paint on it, looks cool at knight:yes:

hahah i never ride at night its a shame. or else iw ould hey can you make it to haspin sunday?

Posted

also...getting new plastics look great for the first couple of rides....once you run into a tree or flip or something you're back to the beginning iwth scratched plastics...I like the painting idea...

wtg fellow mods :) :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • By Matthew Alloway
      What is the best paint for a swing arm. I know powdercoat would be the best, but I am looking for paint type that I can easily do at home. 
    • By GERONAMO308
      Hi all, does anyone know what type of plastic is used for making ATV fairings.
      In particular Suzuki Quadrunner 1992, if i cannot get a plastic for it in Red for the rear i will attempt repair.
      I have a King Chrome plastic welding kit, however you need to know what type of plastic you are welding.
      Any advice would be greatly appreciated. 
    • By shorty
      First ATV but owned 2 wheel versions all my (long) life. 1990 KLF300C for $500.. doesn't run yet but I'm an old automotive mechanic so not worried. Only a little concerned about the price of parts, certain this antique will need many 
    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
×
×
  • Create New...