Quantcast
Jump to content

Recommended Posts

Posted
if you had to replace the piston ever so often, would it be worth even having one?

No. ha ha That is a myth obviously. If they need replaced every 20 hours, and break in time is 20 hours, you would be perpetually replacing freshly broken in pistons. :skeptic:

Posted

If u don't change the rings every 30 hours which is a season of riding u loose power I bet my newly ringed o4 will smoke that wore out yfz I bet he is running on half the power it should be. I would like to hook up a compression gage and see what it reads. Bet it says wore out! I would like every one to go get the facts so u quit giving out false info to people.And that's no bs.Yfz central is a good site but they are not engine builders like the people that I know we have seen a lot of yfz and I will bet that we have gained more info than some kid who goes to yfz central and asked a ? about yfz's. We know how many hours to put on a pistion because we have tore down a yfz at 30 hours and we have tore down a yfz with 60 hours the wear is bad real bad usually bad enough u need to have the jug recromed that means more money than just putting rings on it or do u like to spend money that u don't need to.At 30 hours u put new rings on the piston and put the jug back on unless u do alot of miss shifting then u have to replace the pistion to so remember every time u miss a gear it scares the pistion and cylinder wall.Also yamaha has just released some info on the yfz that I know u guys do not have yet U ARE TO RUN A QUART AND A HALF OF OIL instead of two quarts. And on the yfz CHANGE THE OIL EVERY TIME U GET DONE RIDING IT SOUNDS CRAZY WELL IT'S NOT. This info is coming straight from JSR Performance motor builder. It is making the motors last a little longer since u change the oil every ride no reason to buy high $ oil motor builders say to run castrol gtx.

Posted

To break in a yfz motor u only need to seet the pistion rings this takes a couple of hours of riding remember this motor is not a quad motors it is a race engine.And u have to treat it like one.When u get a brand new yfz I bet half of u broke it in wrong u ride it like u stole it to break it in then shut it down and cool it all the way down then do it agin. I wan't every one of u to keep a stop watch with u when u go ride and log the time u are actually running the motor 20 hours is alot of riding and be honest with me when u report back I bet 20 hours is all most all season.I would not be saying this if it was not true I'll be laughing here in a year or two when your motors start to fail because u don't do the proper mantance on the yfz.

Posted

You're a fool, keep wasting your money and time changing your rings. That is fine, if a YFZ really needs new rings that soon...well I'm glad I ride honda. Honda doesn't even call for valve adjustments that often. And if you are only putting 30 hours a season on your quad...you need to get out more. I do that in a month.

Posted

I didn't even know you could buy gas in zimbabwe.

We were talking about replacing the piston every 20 hours, not the rings every 30. And if you are a YFZ expert, you know a compression test will not be very accurate. Obviously if you change the oil after every ride you will prevent some miniscule wear, but you will also get a longer life out of a machine if you rebuild it after every ride...both of which are not plausible or in any way necessary.

Anyway, your 04 probably did need replaced after 30 hours if you didn't do any kind of oil modification, but I'm sure you have another theory about that.

I guarantee you will not smoke me, and that's no BS, quit giving out false information.

Posted

Check stuff like Craigslist or yfzcentral's 'for sale, complete quads' section. With the economy in shambles, a lot of people have no choice but to dump off their quad. The yfz site has a lot that people get rid of each year, or when they get picked up by sponsors and don't have to buy anything themselves (lucky b@stards!).

Anyway, good luck and let us know how you make out man.

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Popular Now

  • Similar Forum Topics

    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • By ebertz28
      Looking at 2 quads and need help deciding. #1 is a 2021 CF Moto 600 Touring with 69 miles, 2 seater with factory installed plow, windshield, backrest and luggage box with no warranty remaining  for $6500 or #2 2022 CF Moto 500 with 15 miles and a 2 year warranty for $6000?
    • By smipha
      Does anyone have a 2017 polaris ranger xp 1000 hunter edition service manual I can download? The one I have only shows things about the prop shaft for a crew model and mine in a standard. They have different shafts mine is cv not u joint.
    • By 95kingQuad
      As the title says I am on the search for a used OEM 1995 King Quad Carb. I believe it says Mikuni on the side. If you could even help me find info on which carb it is exactly that would be helpful too, or motorcycles/other quads that use the same carb. Thanks!
×
×
  • Create New...