Quantcast
Jump to content

Recommended Posts

Posted

I just purchased this machine as a brand new machine from a dealer as a left over, full warranty and 18 miles on it.

At an idle you can hear a rattling noise which is disturbing to a person who used to be an auto mechanic. I got out my stethoscope (pry bar up to my ear) and the sound appears to be coming from the rear part of the transmission where the clutch basket would be. I read somewhere else on the internet that its the bevel gear and its normal and I just want to make sure. My machine is still under warranty so I can take it back if needed but if anyone with a Vinson can verify that their machine is/was making the same noise I will feel better about it and may still take it to the shop for an inspection.

So far I am very happy with the machine, the handling is great, the power is more than what I need and its ability to go just about anywhere its wheels are pointed are all pluses for me. Last weekend I pulled out 2 swamped quads at the same time so it has some pulling power in low range. My only complaint so far was the rear brake squeaking which I have seemed to fix by disassembling the rear brake and applying anti-seize to the contact points on the caliper for the brake pads. If I had to complain about one more thing it would be the the gear ratio in reverse, its just not as low as I would like and it does not get lower even in low range.

Posted

Congratulations on the new quad. I would really need to hear the noise but I believe that a slight rattle at idle is normal. My suggestion would be to bring it to the dealer for a check up and have them document it, saying that it is fine. This way you have some peace of mind.

Posted

Thanks for the quick reply. I think you offered the best suggestion.

I understand that the cluch basket is most likely a bevel cut gear which could cause a slapping against the Inner bearing mating surface at an idle, especially a rather large engine single cylinder at that...not the smoothest engine by any means or not like a vtwin.

Posted

I ran her over to my local dealer where I purchased the Vinson and they listened to it and said it was normal, they even started up another model just like it but auto and it made the same sound.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
×
×
  • Create New...