-
Similar Forum Topics
-
By middlebrookgt
I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here. I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc. IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up. Happily, it runs and changes gears well in L, but it will not shift into H or R for anything. I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
-
By Suzukiquad
If you had to choose one mod that you couldn't live without, or had to recommend one what would it be?
-
By 97kingquad
Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years.
He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year.
I bought it for 800 bucks and got it running that night and it ran great for a few days
But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing)
Now today I have it running slightly better, but it is still like 20%
I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle
-
By maxbeg
hey guys, I just bought a bayou 220 1989 and it doesn't start manual and electronic, keep blowing the fuse on the starter coil 20 amp when I plug the battery, ignition is not even on.
I removed the body to make myself some space to see the wires, they are not that bad. The only thing that I found is the relay assembly is rusted on the top, like water infiltration in the relay.
lets me know if you ever have experienced this problem or you have solutions for them.
-
By Freedomflyer
MGoing to apologize in advance to those that have a soft spot for wolves. They are definitely not my favorite species of animal. They continue to grow bolder and bolder even with the population exploding all around us in this wide open valley floor. This valley is approximately 40 miles long by 35 miles wide. Was once mostly agricultural but over the last 25+ years, the kids of long time property owners have sold to the highest bidder. Developers buying up small farms and ranches for millions of dollars and eating away at the local agricultural way of life, destroying the rural Montana I, and many natives, once knew, covering up perfect farm land with urban sprawl, never again to produce a grain of wheat or barley, potato, canola seed, or any crop of any kind ever again. Lining developers pockets, raping and pillaging another rural area and leaving the infrastructure in a colossal mess and the local cities trying to figure out how to pay for the improvements to move the traffic, overloading an already overloaded tax base.
FINALLY, after years of farmers and ranchers lobbying and legislation, they finally opened up a season to hunt the destructive and devastating consequences of the reintroduction of wolves into Yellowstone National Park. These animals have become a huge problem outside of the park boundary. Did the powers that be actually think these killing machines would stay inside the park boundaries? Really? Hmmmmm, not the sharpest tools in the shed. Their population has exploded over their reintroduction into the park in 1995. They released 41 wolves into different areas in Yellowstone Park, then made it illegal to kill any of them that came out of the park boundaries. Pretty much leaving farmers and ranchers defenseless in protecting their livelihood without becoming a criminal. If they did ever shoot one the investigation process has been so stringent and stressful a lot of them have done the 3 S's. Shoot, Shovel, and Shutup! There are now over 1500 wolves in western Montana, over 1100 in Idaho, over 400 in Wyoming, and almost 150 in Eastern Washington. Who knows how many have migrated back into Canada.
They finally delisted the wolves and opened up a hunting season on them, something that should have been done years ago before they decimated our elk population.
A friend of ours was able procure a tag and was able to fill it yesterday morning. The wolf was down in the middle of the valley floor stalking his cattle on his family ranch, definitely deserved to be taken out. Personally would like to see more taken down, they have gone well beyond repopulation with this program and have spent millions on tracking and thousands of man hours, colossal waste. Glad to see another one gone.
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.