Quantcast
Jump to content

Drtygrl kickin butt

Stoopidbot1
 Share

Recommended Posts

Stoopidbot1 Grand Master

Stoopidbot1

Posted
Posted

Kristin competed in an ATV/UTV Challenge over the weekend. She only had one other SxS to compete against but she handed it to him. She was in her Rhino and the other guy had an RZR S. Here are some pics from the event...(batteries died in Camera, only have pics of Kristin...

IMG_4302.jpg

IMG_4304.jpg

IMG_4306.jpg

IMG_4308.jpg

IMG_4309.jpg

IMG_4310.jpg

IMG_4311.jpg

IMG_4312.jpg

IMG_4313.jpg

IMG_4317.jpg

IMG_4320.jpg

IMG_4322.jpg

IMG_4327.jpg

IMG_4344.jpg

swampcat07 Grand Master

swampcat07

Posted
Posted

That's great I love when the girls show up the guys. I always get questions about the mods on my wife's ATV from guys thinking its mine. I love saying don't ask me she drives it.

Great job Kristen that log section looked hard. Are all the axels still in one piece?

Stoopidbot1 Grand Master

Stoopidbot1

Posted
  • Author
Posted

The only thing she broke was a skid plate. Better that than the a arm. Here are a few more pics.

This one is her launching her Rhino into the mud, where on earth did she get her name???

kristinmudwheelie.jpg

kristinturn.jpg

mywifeknowseverythin Grand Master

mywifeknowseverythin

Posted
Posted
The only thing she broke was a skid plate. Better that than the a arm. Here are a few more pics.

This one is her launching her Rhino into the mud, where on earth did she get her name???

kristinmudwheelie.jpg

kristinturn.jpg

can you email me these two in HIGH RES....????? Loving the pics:yes: Makes me want to buy one....

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • kingkw
      How can I remove the tires from a 2014 Yamaha Rhino
      By kingkw
      I have a Harbor Freight tire changer. I could not get the tires off the rim.
    • DaveswMN
      Hoping against hope that you will tell me that my '86 225 Moto4 is not as bad as I think
      By DaveswMN
      Pulled my '86 Moto4 out of shed where it sat for 20 years. I knew it smoked. checked it over a little put in gas and it fired right up!! 
      Drove about 100 yards, ran about half throttle wouldn't idle.  Put on somenew parts, jug/piston and rings, carb and valve seals.
      'went together ok, tuned it over by hand about 6 revs whick went well. Hit the starter it fired for about 6 revs and quit. tried it again fired once and then th sound of something slipping like maybe chain slipping over spoket.
      Took cover off to watch cam sproket, hit starter again, heard same noise and the cam sproket was not turning but jumping a bit. Chain was still tight. You will probably tell me I need to split the lower case but hoping there mightbe something else.
      I don't fully understand the chain tightener, the plunger only moves about 1/4 inch, should it move much more than that when off the motor and compressing it by hand?
      Thanks for any thoughts.
    • bkb09
      Rhino 660
      By bkb09
      Hello everybody! I like to putt along in the woods on my old Rhino 660. At the age of 63 that's all I need!
       
    • skittle021
      Super Weird Problem with Primary Sheave/Clutch (Rhino 660/Hisun 550)
      By skittle021
      So I've got a Hisun 550 (clone of a Yamaha Rhino 660) that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 







    • cosmacart
      2013 Yamaha Rhino SE Black Selling Price
      By cosmacart
      Hi all, iam from ohio and i have a 2013 yamaha rhino SE black . I might sell it but i dont know what its worth. So can anyone give me an idea what to ask for it?? This is not a scam,,its only a question thanks in advance!!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...