Quantcast
Jump to content


1993 Kawasaki Bayou Carb Stall Hose


Jadd

Recommended Posts

I bought our son his first quad last week, we took it out today, rode for almost 2 hours no problem. We stopped at an overlook area and when we went to leave his bike wouldn't start. He was parked on a pretty steep incline, so we coasted it to a flatter area. Still nothing. looked around for a bit, tried a few mins later and it was fine... Rode another 5 mins and it just cut out, let sit for 5 and would start back up, did this maybe 3 more times and finally I got to tow strap and pulled him out. Got back home to untrailer it and it started just fine. I checked the plug, looked clean, checked the gap, made a small adjustment. Plenty of oil, coolant and fuel. I did run it out of fuel before this trip and had to switch to the reserve... I took the fuel filter out and blow trough it both ways. I drove it up and down the street and seams to run great... We are planning on taking a long trip in the morning, but dont want this happening again... I was looking at the carb and it raised a question for me. On the left side on the carb, near the top, by the CKG stamp is a nipple, looks like a hose should be attached there...there isnt. what goes there and could dust be getting in there and causing the stall? Like I said, I ran it up and down the street since I have been home, and it seams fine now, but then again it seamed fine for the first 2 hours we were out today too. :) Thanks for any ideas!!

Link to comment
Share on other sites

Welcome to QUADCRAZY! I think you have an intermittent fuel starvation. It may be yoru float in your carb that is not leveling off allowing the float boal to fill up. You may be due for a carb overhaul.

* Added manufacturer to thread title.

Thats kinda what I was thinking, how about that tube sticking up? should I do something about it? And is it possible to take the carb off without removing the gas tank?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.

    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 
×
×
  • Create New...