Quantcast
Jump to content


Thinking on buying a TRX 450R??


Recommended Posts

I have ridden all of the Japanese 450 sport bikes, and I own an LT-R and a TRX. They are all great bikes, I think the biggest difference is going to be personal preferecnce. The YFZ may be the best all-around machine it handles great, but I personally don't like the way you sit on it. A longer steering stem would help that. The Kawi is a good machinge, doesn't feel as strong as the others IMO, but it is light handles well and had reverse. The Honda is the simplest, but that is not necessarily good. I is comfortable, handles well, the suspension is not as good as the others IMO. In my personal experience, between the two TRX's that I have worked on and been around, the wheel and axle bearings seem to wear faster and the rear axle lock nut is more likely to come loose. The LT-R is my personal fav, after I got used to the extra width and put a steering stabilizer on, it is fine in the woods. The frame is a bit heavy and bulletproof. With a few decent mods this machine hauls as*, and I have had no bearing or tie rod problems. With a + 1" steering stem and that big comfy seat it comes with, it is very comfy. The suspension is a bit stiff, but it has the longest travel of the 4 and with few adjustments it works great for me since I am a bit heavier than the target rider that they design the machines for. My only wish is that it was lighter. My friends and my own TRX's have had problems with breaking and loosing bolts in the subframe, and the main frame isn't as sturdy. On the positive side of that, the TRX's are noticeably lighter. The enginge is a little more accessible on the Honda, not a huge deal though. The Suzuki is fuel injected like the KFX, and I love being able to adjust my fuel mix by pushing a couple of buttons instead of changing jets. The TRX is the only one that uses a single cam, which is nice, makes valve adjustment easier and you only need to buy one cam instead of two. The tie rods on the Honda bend if you sneeze on them, between my friend and I, we have bent 3 tie rods in the last 2 years, where as, I have not bent one on my LT-R. On a more positive note, my Dad is a runs a shot-peen forming machine at Boeing, and he can straighten them out and they are much stronger after the shot-peening process. We have yet to bend one of the re-worked ones. Anyways, like I said, they are all good machines, I think each one could be the best choice for one person and the next guy might not like it at all.

Link to comment
Share on other sites

  • 1 month later...
honda has never made their 4x4 line anything more than capable and a great farm tool. Honda has realized the destruction that the big lifted atv's tend to cause. Not the machine but the riders. Honda has always gone to make the smallest footprint eco wise.

agree^^^^^^^^^^^^^^^^^^^^^^^^^^^

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By Gwbarm
      I have been exploring all the options available, so many, its hard to choose. I have kind of narrowed it down to the Honda Pilot, Subaru Outback, and Kind of looking at the Outlander, although its a little small,  the new one is nice looking. Just wondering if anyone has any recommendations or gripes with any of these rides. I have driven Jeeps for the past 25  years and they have been great, but their price point has gotten to high. Expieriences good or bad would be helpful. Thanks!
×
×
  • Create New...