Quantcast
Jump to content

Recommended Posts

Posted

hello and thanks for reading.

i have just recieved a 2000 suzuki quad master 500 it has 1200 miles on it and it needs help. first off the reason i got it for cheap is that the starter reduction gears broke the block where they mount so it has to be pull started. after getting it home i made sure all the metal peaces were removed from inside the stator cover. then i put it all together and started it up. it will idle but if i rev it up it will stumble and back fire real bad. i have cleaned the spark plug and the carb and the air filter. it looks like the cdi box has been replaced i can see butt conectors and bare wire( somebody did a bad job). could this be a timming issue? how do i check time?. any help would be great and no i dont have any manual.

Posted

yes sir. i would have never had guessed that one. i cleaned the fuel tank,carb,and plug and made no difference. so i asked a local rider that said he had the same problem and it ended up being the battery. so i charged the battery overnight (it was dead) and the next day fired it up and it ran like a charm.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...