Quantcast
Jump to content

Recommended Posts

Posted

I have a 2005 400ex that is blowing more oil than normal. :aargh: When i start it while its cold, it blows smoke that im pretty sure is oil! Also, every time i go riding (4-6 hours) It blows a little less than half a tank of oil. My dad says its the piston rings but hes no expert! Also anyone know how i should jet it for a k&n filter? (only because the previous owner had put bigger jets on it, i dont know why) :mad:

Posted

Is it blue smoke? With a K&N you are getting more air in, does it have an aftermarket exhaust? I would check the K&N website and see what they say about jetting specs with their filters. Keep in mind, it could very well be worn out rings.

* Added year and manufacturer to thread title.

Posted

Oil smoke will look different depending on how much oil is being burnt. A little oil usually shows blue smoke, if you are burning alot of oil, and it sounds like you are, it will burn white and smell very strong. Could be piston/rings, could be worn valve guides/seals, could be both. I wouln't worry about the jetting until you get the motor fixed, if you mess with the jetting now, you will probably have to change it again when you get the motor running right. But generally you need to jet just a bit richer for a high flow air filter.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...