Quantcast
Jump to content

Recommended Posts

Posted

I have a 2000 (or 99 I cant remember) Honda Foreman 400. I recently got it stuck and upon getting it out of the mud and water I could not get it to shift back into neutral, and it is impossible to start the quad unless it is in neutral. I have tried rocking it, shifting up then down, and just about every other trick I could think of. Any suggestions as to what's going on here?

Thanks

Posted

I know that with some quads you can start it in gear by depressing the left hand brake. I would check to see if you have any crap from the mud, twigs, etc...caked in there.

* Added year, make, and manufacturer to thread title.

  • 2 weeks later...
  • 5 weeks later...
Posted

Those machines have a funny gear shifting setup, there is a 90 degree joint in the gear shifting spindle. It could very easily get messed up. I would take the side cover off and look behind the gear shift lever, that joint is right on the other side of the cover. If all looks to be working ok on that side, take the other cover off, the gear shift ratchet mechanism is behind that cover. If all of that is working too, then you may have an internal tranny problem and you will need to split the cases to deal with that one. I think it is a good possibility that you will find the problem under one of the side covers. Good luck.

  • 7 years later...
Posted

Had that happen a few times on my 1999 Foretrax TRX300

Rocking it back and forth while shifting gears always fixed her up 

Hope you did not do internal damage

Those machines are pretty much bullet proof

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
×
×
  • Create New...