Quantcast
Jump to content


2003 Yamaha Raptor 660 Backfiring


crx686

Recommended Posts

Hello

I have a Yahama Raptor 660 2003. I bought from my friend it wasn't working when i bought it. All I did was take the carb out and cleaned it, then took the two bowels out and cleaned that. Once I did that then it started. But when you rev it up it back fires and sounds like it has a hard time keeping up, sounds like its going to die. but it sounds fine when at idling. Kinda of wondering if the carb needs to be rebuilt or if there's something elese wrong. If anyone can help that would be great. Thanks for your time.

Link to comment
Share on other sites

Sounds like it's fuel starved. Has it ever been jetted before? Some carbs get corroded inside around the float pin needle, causing the float to not operate quick enough. Pull the carb bowl off and tap that float to make sure it moves freely.

* Added year to thread title.

Link to comment
Share on other sites

I'm going to rebuild the carb to see what happens. On the brakes there is a wire that is broken. Looks like it clips in there I put it back in it doesn't really do anything. I'll let you know what happens after i rebuild the carb Thanks for you help

Link to comment
Share on other sites

I already know that everything is is working or it wouldn't start up on the choke. I'm pretty sure it is the carb being gummed up and not adjust right, its been sitting for a at least 8 months. plus the carb is not in a easy place to work on, its kinda of in there. Also I was thinking of rebuilding it myself but ive really never done it. What screws you talking about? the air/fuel mixture? I was just thinking if i got it rebuilt then i know everything is working in the carb.

Edited by crx686
Link to comment
Share on other sites

my parking brake safty switch was my problem ,sounds like what you described. it took me forever to figure it out, after i did it started doing the same thing only to find out if the tank isnt1/2 full my raptor wont run ? still puzzled by this but i fill it up and runs like a champ. i get below 1/2 tank and it fall's off.

Link to comment
Share on other sites

I got my carb back and I put it back, the thing runs good nice sound. I do have a brake safety switch on order, I learned that mine was missing. which is werid cause I was riding it right after i got the carb then 10 mins later it wouldn't work right. I just want to say thanks for your guys help. you pointed me in the right direction. Thanks again you guys

P.S. redneckyankee your fuel problem could it be the gas cap. Cause like mine its gravity feed in and if it can't breath its going to restricted the flow of gas getting to the carb when the gas gets lower correct?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
×
×
  • Create New...