Quantcast
Jump to content

New Toy... RZR

jigolbeep
 Share

Recommended Posts

jigolbeep Collaborator

jigolbeep

Posted
  • Author
Posted

well im kind of disapointed in houser right now... After i put my arms on i was greasing them and i noticed when i greased my rear lower left arm that grease squirted out like crazy from between the seal cap and the a-arm. I took it apart and found that when they bore the arms it was bored offset so when the suspension travels it creates about a 1/8 inch gap between the seal and the arm so grease can get out and dirt and water in.

I called houser and they told me to ship it to them and they would send me a new one... I shipped it to them last week. I called to see if they had sent my new arm yet and they said they are repairing the one that i had sent in so i probably wont have it for another week... Kind of bad customer service if you ask me...

Notice how much material is on one side vs the other side

DSCN3242.jpg

Gap from the cap to the arm

DSCN3239.jpg

  • 4 weeks later...
jigolbeep Collaborator

jigolbeep

Posted
  • Author
Posted

Well it ended up taking almost a month for houser to fix my a-arm that was built wrong... but anyway its all back together and it rides and handles awesome... I ended up buying new exhaust and a fuel programmer... The exhaust is Looney Tuned duals and the programmer is Attitude Industries which is compatable with nitrous and a turbo setup :yes: :yes:

The exhaust sounds sick.. ill have to c if i can get a sound clip...

DSCN3250.jpg

DSCN3251.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • mehim
      NSFW / Looking for fun ideas for our 2nd Quad Runners event at our nudist campground
      By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Mikey509
      First time quad owner looking for advice!
      By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • HHurks
      CFmoto ATV Parts and Accessories
      By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • rjsummer
      Check your dealer for new tires..
      By rjsummer
      Just some friendly advice on new tires. Check with your ATV dealer. 
      There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...