Quantcast
Jump to content

Recommended Posts

Posted

2006 400 4x4 manual trans. Hello all, new to the forum and already have a question. My bike will shudder for just a second when shifted into 2nd gear, stops when rpm's come up the shudder is most prevalent when going uphill. Anybody else ever had this problem?

Posted

Does it feel like it is slipping at all? Does that thing have a high and low range? If so, does it do the same thing in high and low? Could be a clutch problem, could be a problem with the gears themselves, could be a bent shift fork or shift cam or any part of the gear switching mechanism. You may find that the problem gets better by changing the oil. I would do that first and when you drain it, check for any metal chunks or flakes in the oil. When you fill it back up, use good oil, we have an AC guy here who is pretty knowledgeable, I'm sure he will chime in with some more helpful stuff. Good luck.

Guest S-Hardy
Posted

Yeah it sounds like you my have some clutch problems changing the oil might help out you might want to check on using maybe a little thicker oil I would call and ask the dealer. It been a older mod like that it might need something a little thicker because the clutches have some wear on them .

Posted

thanks for the replies, I too was wandering about the clutches, the bike has about 126 hrs and a little more 900 miles, I left the bike with the local dealership for the last two weeks and came away from that experience totally unsatisfied. I talked to a local indepedent tech on 6/10 that told me more in 5 minutes than the dealership did in two weeks. I delivered the bike to his shop on 6/11 and they thought they would have an opinon by 6/13. So, thanks again for responding, I'm taking the bike into northern New Mexico in september and don't want it to break down on the back side of Greenie Peak

  • 2 weeks later...
Posted

hello all, I want to throw out a thank you to DirtDemon and S-Hardy, appreciate ya'lls replies, got the cat out of the hospital today and went for a short ride this afternoon it sure felt a lot better. The tech adjusted the clutch pkg, he said it wasn't really ready for a new clutch yet, I was pleasantly surprised at that, I was sure I was going to hear that I needed a new clutch

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By wanrep
      View File 2019-2024 Yamaha YFZ 50 service manual
       2019-2024 Yamaha YFZ 50 service manual
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By wanrep
      View File 2017-2018 Yamaha YFZ 50 service manual
      2017-2018 Yamaha YFZ 50 service manual
      YFZ05YYXH
      YF05RH
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
×
×
  • Create New...