Quantcast
Jump to content


2006 suzuki LTZ400 starting problem


badchad83

Recommended Posts

Hello, Im new to the site but I have been reading the forums and like the input so I wanted to ask everyones opion of what is going on with my quad? The last time I was riding my 400 I was on the gas in 3rd or 4th gear and it started acting like something with locking up or catching in the trans, then it did and stalled the engine and the tire stopped and I slid to a stop. it did this once before but it started back and ran fine since. This time it will not crank back, wont even attempt to spin the engine. I pulled the small 3 bolt cover off the end of the starter and spun the gears, they spin fine the opposite way but when you try to spin them in the direction the starter spins the motor they wont budge......any ideas on the problem or what I may be missing?? Thanks in advance!

Link to comment
Share on other sites

I have tried to put it in gear and get it to rotate but it wont budge. I took the small cover off the front of the starter and the side cover on the engine and tried to turn the crankshaft with a wrench and a socket/ ratchet and it wont move at all. The reason I am asking if I am missing something other than just the obvious that the trans or eng is junk is because it did this one time before and then it broke free like nothing was wrong and ran flawless for months until now.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.

×
×
  • Create New...