Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hello

This is my first time in here so here it goes. I have a a problem with my Quad Master 500. It started about 6-8 months ago. It starts up great and idles fine. When I put it in gear it runs great but all of a sudden it starts to jerk and back fire. When I put it in neutral I give it throttle it will rev and die down. It wont shut off it just surges up and down. It will do this for about 20 min. or so. I will shut it off then start it up then it will work fine for along time. Then all of a sudden it will start to jerk and back fire. I put new plug, air filter and fuel cleaner but it still acts up. This has has been a great bike and a good work horse at the cabin. Does anyone please have an thought what it might be or lead me in the right direction. I think it could be in the carb. but not shure. Thank you

Edited by Ajmboy
Posted

Could be a fuel starvation problem, or an intake air leak. Check the machine for air leaks by spraying WD 40 or carb cleaner around the intake area, if you hear any changes in the idle, you are sucking the stuff in and probably have an air leak there. You also may want to check the fuel valve and look inside the carb for deposits, it may need a good cleaning. Does the fuel valve have off-on-res settings, or on-res-prime settings? If there is a "prime" setting, and no "off" setting, you have a vacuum operated fuel valve, this could also be your problem. If this is the case, try running the machine with the valve in the "prime" position. Check the vacuum line that runs to the valve, make sure it is not leaking.

Posted

I keep the 4wheeler at my cabin so when I get upthere next weekend I will surely check that out. I want to check for dirt in the gas also. Thank you so much for the reply.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
    • By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...