Quantcast
Jump to content

Recommended Posts

Posted

HI all, I am some what new to the world of quads. I purchased a yamaha big bear moto four used. I ran it a little this spring and it was running good when I parked it for a couple of weeks. Now it wont start. It turns over but there is no spark.

Could you guys give me any ideas. Thank for any replies.

  • 2 months later...
  • 3 weeks later...
Posted

Before you spend the bucks on something you dont need.

Pull off all the body parts and check each wire connection. Clean them a add dielectric grease to EVERY connection including the spark plug and cap.

Also a bad battery can cause the lack of spark.

DO NOT TRY AND JUMP IT WITH A CAR battery - HIGH CRANKING AMP batteries COULD DAMAGE THE "CDI" ELECTRONICS.

If you get it started check the DC voltage going to the battery. If its between 13.5 and 14 volts your stator is OK.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By Ajmboy
      Just curious if anyone will be watching 2026 FIFA World Cup and if you have any favorites. Obviously would like to see the US win, but still going to try and watch as many matches/countries as I can with guys like Messi, Ronaldo, Mbappe and the teams they represent. 
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
×
×
  • Create New...