Quantcast
Jump to content

Recommended Posts

Posted

OK so even before I start my quad, I was tooling around with my nice shiny Fox V1 helmet.

I found out that your not supposed to pull out the little red emergency tab.

I went back to the dealer very red faced and explained to them what happened. They were going to swap out my helmet for a new one to make things quick and easy but the didn't have any more in stock.

So now I have a new helmet a HJC CL-X6 Frenzy. I like the fit of this helmet better. This helmet doesnt have the red quick release tab but that might be a good thing in my case/

Lesson learned.

Posted

wow man...i have a fox v1 empire helmet and i dont think it has a "red tab"....i've never seen one. thanx for the heads up...i'm sure i wudda been in the same boat..."wonder what this red tab does?" YANK

Posted

The red tab unlocks the helmet from the foam section. its behind the chin strap. Sounds innocent right? Its for when an EMT has to remove your helmet but doesnt want to move your neck after an accident. Trouble is its one time use only then you have to replace it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...