Quantcast
Jump to content

1999 arctic cat 300 4x4 blows smoke

Crawfishkarl

By Crawfishkarl
in Arctic Cat ATV Forum

 Share

Recommended Posts

Crawfishkarl Newbie

Crawfishkarl

Posted
Posted

I just picked up this project for my son. It has been sitting up for a year. I have drained the fule tank and replaced the battery. I can get it to turn over it i keep the starter engaged. It will fire and try to run but blows white smoke. I am thinking the rings are seized. any suggestions?

Crawfishkarl Newbie

Crawfishkarl

Posted
  • Author
Posted

Well.... I put seafoam in the piston and went to check the oil and was met with a geyser of oil and gas. Appearently they must have had a full tank of gas and didnt shut off the fuel when the quit using it. I will work on it today and see where we are.

swampcat07 Grand Master

swampcat07

Posted
Posted

Looks like the carb needs a good cleaning. I always thought white smoke was coolant but I think your ATV is oil cooled. Maybe it is some of the condensation in the exhaust burning off. If is is smoke from oil replace the rings and check the cylinder clearances.

Crawfishkarl Newbie

Crawfishkarl

Posted
  • Author
Posted

Well i got it running. It is hard to start and still smokes but not alot. I am going to treat the gas and clean the carb. I am going to continue with the sea foam for a bit and see if that doesnt solve the problem. if not looks like a set of rings are in my future.

How tough of a job is it?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Mikey509
      2000 honda recon battery charging
      By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • LMI
      2005 Suzuki King Quad Battery Question
      By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • HoldenBoy
      Starter not staying engaged while cranking
      By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • joshualutz
      reviving lt80 project for my boys
      By joshualutz
      so we got this little lt80 given to us when we bought my sons dirtbike as kind of a throw in gift it was just sitting not being used and my youngest fell in love with it so the gentleman we bought the bike from said we could take it as well for a little project 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...