Suzuki King Quad 300 firing problems

[bubby]

i have a 300 suzuki king qaud wont fire but its stuck in super low is that a problemor is it somethin else i check the stator with a voltmeter itits fire ther:aargh:

[marioweldinginc]

OK so your saying its stuck in low range and its not firing at the spark plug?

[Ajmboy]

Have you checked the wire and plug? What year is that king quad? Tha's got those crazy shifters right? Might not fire in gear...

* Added make and model to thrad title. Missing year.

[bubby]

i got new rings for a 2000 king qaud 4x4 they fit perfect when it was running ive checked th pluug and the plug wire i checked th wireing with a voltmeter it stops get fire at the in the wires plug in the front but theres acouple ground wires un plugged but i dont tthink they r much but the reason i said its in superlow i put everthing in the moter new timing chain but i forgot the 4x4 gear had to put all the gears back i put the hi low super low in super low by mistake i started it withboostin cabeles it quit

[bubby]

i got new rings for a 2000 king qaud 4x4 they fit perfect when it was running ive checked th pluug and the plug wire i checked th wireing with a voltmeter it stops get fire at the in the wires plug in the front but theres acouple ground wires un plugged but i dont tthink they r much but the reason i said its in superlow i put everthing in the moter new timing chain but i forgot the 4x4 gear had to put all the gears back i put the hi low super low in super low by mistake i started it withboostin cabeles it quit

i rode it about 20feet it was crawlin like a bulldozer thats how i no its in super lowit run about 2 min and quit and wouldnt fire i just hate to pull that side of the moter off again unless its ahave to

[bubby]

rightwhen i put the new timing chain in puta new 4x4 gear in i put it in superlow didnt no it

[bubby]

any suggestions

[bubby]

im pretty good aabout the moter but i stink at electrical

[CK1999_400ex]

i think it has a safety on it that keeps it from starting in gear ... but not 100% shure ... you can also see if it has power to the coil ... if not trace it back from there