Quantcast
Jump to content

Recommended Posts

Posted

hi guys im new to this forum so please bare with me i have a 96 suzuki ltf-250 i bought it new in 96 about a year ago it started acting up it got to where you had to crank and crank to get it to start and when you let off the gas it would not idle so i talked to a suzuki mechanic who was supposed to be good and he said the valves probably needed adjusted so i took it to him he checked the valves and said they were ok he checked the spark and said i had fire but that it was weak he also said that the fuel valve on the bottom of the tank was wore out and that it was probably letting fuel go past my rings into the crankcase he said he smelled gas in my oil so i bought a new cdi and fuel valve he put them on and still could not get it to start by this time i am getting leary of this guy he then says my intake valve is probably worn and not sealing up i go pick up my machine this is in june and my fatherinlaw is dying with cancer so i put the project on hold two weeks ago i carry it to another mechanic and he checks it out and calls me and says your valves are fine and he checked the compression and says i have plenty but he cannot get it to fire i remind you this is a new cdi unit three months ago when i put it in i had fire at the plug three qaurter inch long he unplugged my cdi plugged one he had up to it and it fired once and quit he said that the regulater rectifer may be bad guys back in the spring it might start occasionally but when you rode it it was like it was bogging down with a dirty carb i really need help with this guys also your thoughts on this model as well as longevity and dependibility thanks

Posted

First welcome to QC !!:yes: I would get a second opinon :yes:and see what he says then decide how far you are willing to go !! I would have thought Valves also ! But not knowing the history of the quad its hard to pin down a cause

Posted

guys one thing i forgot to mention on my earlier post was that the first mechanic that told me i needed a new cdi unit also tried starting it with starting fluid through the air cleaner and it would not start he then sprayed some in the spark plug hole and it hit and ran for a second thats when he said he bet the intake valve was worn out but my second mechanic checked the valves and said they were adjusted correctly and he checked the compression and said that i had plenty this quad has never used any oil or anything i just dont understand i hope i have posted this in the right area i did not know if i needed to post in the suzuki only forum any and all help will be greatly appreciated

  • 2 weeks later...
Posted

guys i posted about this machine in the wrong forum earlier we have checked the valves they are ok we checked compression we have a 160 psi we have fire at the plug and it still wont start we pulled the top off the carb and the spring was laying in the top we put it back in and it still wont start some time back i was trying to drain the bowl and i turned the wrong screw out it was the throttle adjust screw i put it back in all the way and i didnt back it out so i dont know if the throttle is set correctly now. guys we even tried starting it with starting fluid it still wont start . i am at my wits end .please any help would be greatly appreciated.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...