Quantcast
Jump to content


Help me CK!! 2003 Honda 400ex No rear brake.


marioweldinginc

Recommended Posts

While going on a neighborhood run,I lost my rear brake. Well not lost as in missed placed but my brake pedal went instantly to the lever stop. When I am pushing the atv by hand I can stop the quad with the rear brake but above 15 mph its like i am not using any brake. Rechecked the pads at half way. I have about little more than half way between full and empty marks on the brake resevoir of fluid. Should I bleed or did I just blow out my master cylinder?

Sent from my SGH-T959V using Tapatalk

Link to comment
Share on other sites

the dealer can order the rebuild kit and there are several companys that make them .. you can also check several atv parts places online ..just make shure you use some lube when puting it back together or you might tear a seal or O ring.. petrolium jelly works best

Whats the best way to go? Factory or aftermarket? Complete mc or should I rebuild it?

If factory I will get it from Bikebandit.

Sent from my SGH-T959V using Tapatalk

Link to comment
Share on other sites

the 400ex in my post's is a 1999 with a 07 motor and plastic with full flight A-arms and works tripple rate shocks with rezzies and is fan cooled with alot of other extra goodies on it .. i had alot of time and money in it ..it was completly taken apart and powder coated and painted and reassembled in about 3 weeks time i also polished the lower motor mounts and made the stainless steel air scoops on it ..it was alot of fun doing it and i got alot of compliments on it ...they are alot of fun and parts are easy to come by ...

Link to comment
Share on other sites

  • 2 weeks later...
While going on a neighborhood run,I lost my rear brake. Well not lost as in missed placed but my brake pedal went instantly to the lever stop. When I am pushing the atv by hand I can stop the quad with the rear brake but above 15 mph its like i am not using any brake. Rechecked the pads at half way. I have about little more than half way between full and empty marks on the brake resevoir of fluid. Should I bleed or did I just blow out my master cylinder?

Sent from my SGH-T959V using Tapatalk

check your master cylinder but also check your brake pad thickness the best place to order your parts from that found out is to buy from motorsport .com.

Link to comment
Share on other sites

While going on a neighborhood run,I lost my rear brake. Well not lost as in missed placed but my brake pedal went instantly to the lever stop. When I am pushing the atv by hand I can stop the quad with the rear brake but above 15 mph its like i am not using any brake. Rechecked the pads at half way. I have about little more than half way between full and empty marks on the brake resevoir of fluid. Should I bleed or did I just blow out my master cylinder?

Sent from my SGH-T959V using Tapatalk

check your master cylinder and check your brake pads if they worn bad the calipher is maxed out and wont apply the brakes plus your brake rotor can be worn.

Link to comment
Share on other sites

make sure your tank not clogged or your brake line hasnt clapsed internaly check your brake pads maybe worn out and your calipher may be fully extended as well as your rotor.

I think what happened was coal mud built up in the rear caliper and i would keep mashing the footbrake because the pedal got so hard. I rarely use front brakes. I removed the rear caliper and cleaned out all the mud. I had plenty of pad left i only have 8 rides on tjem. I guess by overly mashing tje rear i damaged the master cylinder piston seal thigamajig. When I would bleed the brakes i would get full brake again. I completly flushed out the old dot4 fluid. Then after about a quarter mile i would lose the pedal.

After i replaced the m/c i have great pedal. I do have to adjust the brake pedal throw.

Sent from my SGH-T959V using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Ajmboy
      What's the best kids atv out there? I've seen everything from the ones released by the major manufacturers to all those knock offs. Kawasaki has a KFX 50 that is pretty nice for under $1800...
       
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By Ajmboy
      Anyone purchase or check out Rockymtnatv lately? Well I was just browsing over there and they have a pretty cool section called Ten Dollars Or Less. Some interesting things to check out if you are in the market.


    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
×
×
  • Create New...